Bedienungsanleitung Casio CT-X5000 (Seite 107 von 157) (Englisch, Spanisch)

723237

107

Zoom out

Zoom in

Vorherige Seite

1/157

Nächste Seite

Using the MIDI Recorder to Record

EN-106

The ranges of the event settings are shown in the table below.

*1 CT-X5000: 1 to 393, CT-X3000: 1 to 343

*2 See “Auto Accompaniment Chord Event” (page EN-105).

*3 All chord types that can be fingered on the accompaniment

keyboard or “NonChord”. See “Fingering Guide” (page

A-2).

Perform the procedure under “To enter the

Song Editing Mode” (page EN-99).

Use the [1] (V) and [3] (W) bm number keys

to display “TrkEvent”, and then press [6]

(ENTER).

This displays “Trk Sy”

Use bn [–] and [+] or the bl dial to specify the

event edit target track, and then press [6]

(ENTER).

This displays the [EVENT] indicator to the left of the

[EDIT] indicator.

• This displays the event at the beginning of the track.

Use the [2] (w) and [5] (q) bm number keys to

display the event whose parameters you want

to change.

• Event location information (measure, beat, tick) is

shown on the right side of the display.

• Displaying a note event causes a confirmation tone

(the note of the note event) to sound.

• While editing the system track, one of the indicators

below will be displayed. The displayed indicator

indicates the part where the displayed event is

recorded.

Depending on the event you are editing,

perform one of the procedures below.

• For information about event status indicators and how

to interpret indicators, see “Event Display” (page

EN-105).

• Pressing ck PLAY/STOP while editing an event will

play back the recorded data from the beginning of the

measure that includes the displayed event.

Y Note Events

(1) Use the [2] (w) and [5] (q) bm number keys to

display a note event.

(2) Use the [1] (V) and [3] (W) keys to display the

parameter you want to change.

(3) Use bn [–] and [+] or the bl dial to change the

setting value of the displayed parameter.

• You can also use the keyboard to specify note

numbers.

• The gate time beat (GateBeat) can be specified in

the range of 0 to 340 for a song with a time

signature from 2/4 to 8/4, and in the range of 0 to

680 for a song with a time signature from 2/8 to

16/8.

• The gate time tick (GateTick) can be specified in

the range of 0 to 95 for a song with a time

signature from 2/4 to 8/4, and in the range of 0 to

47 for a song with a time signature from 2/8 to

16/8.

(4) Repeat steps (2) and (3) for each of the parameters

you want to change.

• While a note event is displayed, you can use the [2] (w)

and [5] (q) bm number keys to scroll between events. If

the event you scroll to is a note event, the same parameter

remains displayed.

Event Setting Ranges

Event Parameter (Display) Settings

Notes Note Number (C1 to G9) 0 to 127

Velocity (Velocity) 1 to 127

Gate Time Beat (GateBeat) 0 to 340

Gate Time Tick (GateTick) 0 to 95

Tone

Number

Tone Number (Tone) 1 to 900

Rhythm

Number

Rhythm Number (Rhythm) *

Chord Chord type or “NonChord”*

To edit an event

Displayed

Part Display

UPPER 1

UPPER 2

LOWER 1

LOWER 2

Auto Harmonize

Phrase Pad 1 to 4 to

Measure Beat

Tick

CTX5000_3000_EN.book 106 ページ２０１８年２月２６日　月曜日　午後３時５６分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio CT-X5000 Seite 107

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio CT-X5000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info