Bedienungsanleitung Casio CT-X800 (Seite 40 von 74) (Englisch, Spanisch)

723289

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

EN-39

You can use the procedure in this section to record your

keyboard play for later playback. You can record your own

keyboard play, or the part of either hand during a lesson using

a song. You can also record play using Auto Accompaniment,

or overdub a recording of another keyboard performance.

Recorded content is saved in Song Bank locations 171

through 176 (user songs). Locations 172 through 176 are for

keyboard performances. Location 171 is for keyboard play

along with a song lesson.

Use the following procedure to record everything you play on

the keyboard. Recorded content is saved in Song Bank

locations 172 through 176.

Press bm RHYTHM.

Press bp RECORD/STOP.

This will enter record standby.

• To exit record standby, press bp RECORD/STOP as

many times as necessary until the RECORD indicator

is no longer displayed.

Configure the tone, rhythm, and other settings

you want to use.

Start playing.

Recording starts as soon as you play something on the

keyboard.

• You can use Auto Accompaniment while playing. If you do,

Auto Accompaniment also will be recorded.

• The flashing on the screen shown in step 2 becomes faster

when remaining recorder memory capacity becomes less

than 101 notes.

• Up to five recorded songs can be in memory at one time.

• Recording memory capacity is approximately 40,000 notes

per song.

To stop recording, press bp RECORD/STOP.

To play back what you have recorded, press

8PLAY/STOP.

Each press of 8PLAY/STOP starts and stops

playback.

• Turning off the Digital Keyboard while recording is in

progress will cause any data in recorder memory to be

deleted.

• A new recording replaces (deletes) previously recorded

contents.

• Due to the way the Digital Keyboard’s system is

designed, certain tone, Auto Accompaniment, reverb,

and chorus settings can result in the sound produced

during playback to be different from the sound that you

heard when you recorded.

In addition to the keyboard play and Auto Accompaniment you

record to Track 1, you can overdub up to five keyboard play

tracks.

■About tracks

Tracks are numbered from 1 to 6.

• If you do not specify a track number when recording,

recording is performed to Track 1 automatically.

In addition to what you play on the keyboard, the following

information also is recorded.

• Track 1

Tone number, rhythm number, rhythm controller,

Auto Accompaniment volume level, tempo, beat,

reverb setting, chorus setting, chord play, layer play,

split play, auto harmonize/arpeggiator play,

scale setting, octave shift setting, pedal operations,

pitch bend wheel operation, pitch bend range setting

• Tracks 2 through 6

Tone number, arpeggiator play, octave shift setting,

pedal operations, pitch bend wheel operation,

pitch bend range setting

Recording Your Keyboard

Play

Recording and Playing Back

Keyboard Play

Flashes

Lights

Overdubbing a Recorded Track

CTX800-ES-1A.indd 41 2017/11/28 10:19:11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio CT-X800 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio CT-X800

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info