Bedienungsanleitung Casio CT-X870IN (Seite 22 von 74) (Englisch)

723290

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

EN-21

Playing Built-in Songs

You can use the following procedure to change the speed

(tempo) in order to slow down playback to practice difficult

passages, etc.

See “Changing the Tempo Setting” (page EN-11).

Use the following procedure to adjust the balance between

the volume of what you play on the keyboard and song

playback volume.

See Function No.9 under “FUNCTION Button (cs)

Functions” (page EN-43).

The procedure below lets you select the same keyboard tone

as the one being used in the song and play along with your

favorite tunes.

After selecting a song, hold down bn SONG

BANK for about two seconds until the

displayed tone name changes to the tone name

of the song.

• If your currently selected tone is the same as the song

tone, the display contents will not change.

Play along with song playback.

• If you select a song that uses different tones for left and

right hand play, the right hand part tone is assigned to the

keyboard.

You can load song data from an external device and increase

the selection of songs available on the keyboard. See the

following pages for more information. See page EN-54 for

details about how to transfer sampled data to a computer for

storage.

• For information about how to delete song data loaded from

an external device, see page EN-42.

You can use the following procedure to play back user song

data (page EN-54) directly from a USB flash drive.

• Whenever you copy a file to the USB flash drive that

you plan to play on the Digital Keyboard, be sure to

store the file in the MUSICDAT folder on the USB flash

drive.

Insert the USB flash drive into the Digital

Keyboard’s USB flash drive port.

• Never plug any other device besides a USB flash drive

into the USB flash drive port.

• When you perform a USB flash drive operation or turn

on the Digital Keyboard while a USB flash drive is

plugged in, the Digital Keyboard initially needs to

perform a “mounting” sequence to prepare for data

exchange with the USB flash drive. Digital Keyboard

operations may be momentarily disabled while a

mounting sequence is being performed. While the

mounting process is in progress, the message

“Mounting” will be displayed. It may take up to 10 or 20

seconds or even longer for a USB flash drive to be

mounted. Do not attempt to perform any operation on

the Digital Keyboard while a mounting sequence is in

progress. A USB flash drive needs to be mounted each

time it is connected to the Digital Keyboard.

Press bn SONG BANK.

Use the ct number keys, and the dk [–] and [+]

keys to select the song you want to play.

• Hold down bo CATEGORY as you use the dk [–] and

[+] keys to select the USB category.

Press 8PLAY/STOP.

This will start playback.

• Each press of 8PLAY/STOP starts and stops

playback.

Changing Playback Speed (Tempo)

Adjusting the Song Volume

Playing with the Tone as Song Playback

(Tone Sync)

Increasing the Selection of Songs

Playing Back Data from a USB

flash drive

CTX870IN-E-1A.indd 23 2017/12/18 15:24:56

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio CT-X870IN Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info