Bedienungsanleitung Casio ctk-50 (Seite 59 von 83) (Englisch)

564684

Zoom out

Zoom in

Vorherige Seite

1/83

Nächste Seite

E-57

MIDI

*1 The BANK SELECT setting of PROGRAM CHANGE can be used

to access any of this keyboard’s 255 tones when selecting tones on

this keyboard from an external machine.

Bank 0: 128 General MIDI tones (PROGRAM CHANGE 0 to 127)

Bank 1: 118 panel tones (PROGRAM CHANGE 0 to 117)

Bank 120: 9 drum sets

(PROGRAM CHANGE 0, 8, 16, 24, 25, 32, 40, 48 and 62)

Immediately prior to sending the PROGRAM CHANGE message,

send two successive CONTROL CHANGE messages containing

the following data.

CONTROL NUMBER= 0, CONTROL VALUE= <bank number>

CONTROL NUMBER= 32, CONTROL VALUE= 0

Example: To select tone number 96 (panel tone “FLUTE 1”)

from an external MIDI machine.

CONTROL NUMBER= 0,

CONTROL VALUE= 1 (bank number)

CONTROL NUMBER= 32, CONTROL VALUE= 0

PROGRAM CHANGE= 96

*2 RPN stands for Registered Parameter Number, which is a special

control change number used when combining multiple control

changes. The parameter being controlled is selected using the

control values of control numbers 100 and 101, and then settings

are made using the control values of DATA ENTRY (control

numbers 6 and 38).

This keyboard uses RPN to control this keyboard’s pitch bend sense

(pitch change width in accordance with bend data) from another

external MIDI device, transpose (this keyboard’s overall tuning

adjusted in halftone units), and tune (this keyboard’s overall fine

tuning).

NOTE

• Sustain (control number 64), sostenuto (control number

66), and soft (control number 67) effects applied using

the foot pedal are also applied.

PROGRAM CHANGE

This is the tone selection message. PROGRAM CHANGE can

contain tone data within the range of 0 to 127.

A PROGRAM CHANGE message is sent out through this

keyboard’s MIDI OUT terminal whenever you manually

change its tone number. Receipt of a PROGRAM CHANGE

message from an external machine changes the tone setting

of this keyboard.

NOTE

• This keyboard supports 128 tones in the range 0 to 127.

However, Channel 10 is a percussion-only channel, and

Channels 0, 8, 16, 24, 25, 32, 40, 48, and 62 correspond

to the nine drum set sounds of this keyboard.

PITCH BEND

This message carries pitch bend information for smoothly

sliding the pitch upwards or downwards during keyboard

play. This keyboard does not send pitch bend data, but it can

receive such data.

CONTROL CHANGE

This message adds effects such as vibrato and volume changes

applied during keyboard play. CONTROL CHANGE data

includes a control number (to identify the effect type) and a

control value (to specify the on/off status and depth of the

effect).

The following is a list of data that can be send or received

using CONTROL CHANGE.

Effect Control Number

BANK SELECT*

0, 32

★ Modulation 1

★ Volume 7

★ Pan 10

★ Expression 11

Hold1 64

Sostenuto 66

Soft Pedal 67

RPN*

100 / 101

Data Entry 6 / 38

★ indicates receive-only messages

704A-E-059A

CTK591_e_46-58.p65 03.10.7, 4:27 PM57

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio ctk-50 Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio ctk-50

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info