Bedienungsanleitung Casio CTK-573 (Seite 39 von 54) (Englisch)

466833

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

E-37

KEYBOARD CHANNEL

The keyboard channel is the channel used to send MIDI messages

from this keyboard to an external device. You can specify one chan-

nel from 1 to 16 as the keyboard channel.

1. Press the TRANSPOSE/TUNE/MIDI button until the

KEYBOARD CHANNEL screen appears.

2. Use the [+], [–], and the number buttons to change

the channel number.

Example: To specify channel 4

NAVIGATE CHANNEL (Default: 4)

When MIDI messages are received from an external device for play

on this keyboard, the navigate channel is the channel whose note data

appears on the display. You can select one channel from 1 to 8 as the

navigate channel. Since this setting lets you use the data on any chan-

nel of commercially available MIDI software to light on the on-screen

keyboard guide, you can analyze how different parts of an arrange-

ment are played.

1. Press the TRANSPOSE/TUNE/MIDI button until the

NAVIGATE CHANNEL screen appears.

2. Use the [+], [–], and the number buttons [1] through

[8] to change the channel number.

Example: To specify channel 2

❚

NOTE

❚

The navigate channel automatically changes to 1 whenever you turn MIDI

IN CHORD JUDGE.

To turn off specific sounds before playing back MIDI data

that is being received

<<Navigate channel on/off>>

While playing MIDI data, press the RIGHT/TRACK 2 button.

•This cuts the sound of the navigate channel, but on-screen key-

board guide keys continue to light in accordance with the chan-

nel’s data as it is received. Press RIGHT/TRACK 2 button again to

turn the channel back on.

<<Next lower channel from navigate channel on/off>>

While playing MIDI data, press the LEFT/TRACK 1 button.

•This cuts the sound of the channel whose number is one less than

the navigate channel, but on-screen keyboard guide keys continue

to light in accordance with the channel’s data as it is received. Press

LEFT/TRACK 1 button again to turn the channel back on.

Example: If the navigate channel is channel 4, the above operation

turns off channel 3. If the navigate channel is channel 1 or 2,

the above operation turns off channel 8.

LAYER

SPLIT

LAYER

SPLIT

Lit

702A-E-039A

General MIDI

As we have already seen, MIDI makes it possible to exchange musi-

cal data between devices produced by different manufacturers. This

musical data does not consist of the notes themselves, but rather in-

formation on whether a keyboard key is pressed or released, and the

tone number.

If tone number 1 on a keyboard produced by Company A is PIANO

while tone number 1 on a Company B's keyboard is BASS, for exam-

ple, sending data from Company A's keyboard to Company B's key-

board produces a result entirely different from the original. If a com-

puter, sequencer or other device with auto accompaniment capabili-

ties is used to produce music data for the Company A keyboard which

has 16 parts (16 channels) and then that data is sent to the Company

B keyboard which can receive only 10 parts (10 channels), the parts

that cannot be played will not be heard.

The standard for the tone numbering sequence, the number of pads,

and other general factors that determine the sound source configura-

tion, which was arrived at by mutual consultations by manufactur-

ers, is called General MIDI.

The General MIDI standard defines the tone numbering sequence,

the drum sound numbering sequence, the number of MIDI channels

that can be used, and other general factors that determine the sound

source configuration. Because of this, musical data produced on a

General MIDI sound source can be played back using similar tones

and identical nuances as the original, even when played on another

manufacturers sound source.

This keyboard conforms with General MIDI standards, so it can be

connected to a computer or other device and used to play back Gen-

eral MIDI data that has been purchased, downloaded from the Inter-

net, or obtained from any other source.

Changing MIDI Settings

You can use this keyboard in combination with an external sequenc-

er, synthesizer, or other MIDI device to play along with commercial-

ly available General MIDI software. This section tells you how to make

the MIDI settings required when connecting to an external device.

TRANSPOSE/TUNE/MIDI Button

Each press of the TRANSPOSE/TUNE/MIDI button cycles through

a total of 12 setting screens: the transpose screen, the tuning screen,

and 10 MIDI setting screens. If you accidentally pass the screen you

want to use, keep pressing the TRANSPOSE/TUNE/MIDI button

until the screen appears again. Also note that leaving a setting screen

is automatically cleared from the display if you do not perform any

operation for about five seconds.

GM MODE (Default: Off)

on: This keyboard plays General MIDI data from a computer or oth-

er external device. MIDI IN CHORD JUDGE cannot be used when

GM MODE is turned on.

oFF:MIDI IN CHORD JUDGE can be used.

1. Press the TRANSPOSE/TUNE/MIDI button until the

GM MODE screen appears.

Example: When GM MODE is turned off

2. Use the [+] and [–] or [0] and [1] buttons to turn the

setting on and off.

Example: To turn GM MODE on

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio CTK-573 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio CTK-573

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info