Bedienungsanleitung Casio CTK-700 (Seite 17 von 45) (Englisch)

466824

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

E-15

627A-E-017A

Connections

Phones/Output Terminal

Before connecting phones or other external equipment, be

sure to first turn down the volume settings of the keyboard

and the connected equipment. You can then adjust volume

to the desired level after connections are complete.

[Rear Panel]

White

Red

PIN plug

Stereo standard

plug

Audio connection

PHONES/OUTPUT terminal

Keyboard amp,

guitar amp, etc.

LEFT

RIGHT

AUX IN or similar terminal

of audio amplifier

Connecting Phones (Figure 1)

Connecting phones cuts off output from the keyboard’s built-

in speakers, so you can play even late at night without

disturbing anyone.

Audio Equipment (Figure 2)

Connect the keyboard to a audio equipment using a

commercially available connecting cord with a standard plug

on one end and two PIN plugs on the other end. Note that

the standard plug you connect to the keyboard must be a

stereo plug, otherwise you will be able to output only one of

stereo channels. In this configuration, you normally set the

input selector of the audio equipment to the terminal (usually

marked AUX IN or something similar) where the cord from

the keyboard is connected. See the user documentation that

comes with your audio equipment for full details.

Musical Instrument Amplifier (Figure 3 )

Use a commercially available connecting cord* to connect the

keyboard to a musical instrument amplifier.

* Be sure to use a connecting cord that has a stereo standard

plug on the end you connect to the keyboard, and a

connector that provides dual channel (left and right) input

to the amplifier to which you are connecting. The wrong

type of connector at either end can cause one of the stereo

channels to be lost.

When connected to a musical instrument amplifier, set the

volume of the keyboard to a relatively low level and make

output volume adjustments using the amplifier’s controls.

INPUT 1

INPUT 2

PIN jack

PIN plug (red)

PIN plug (white)

Stereo standard plug

Keyboard or

guitar amp

To keyboard’s

PHONES/OUTPUT

terminal

Standard plug

[Connection Example]

NOTE

• You can also connect the keyboard’s MIDI terminal to a

computer or sequencer. See “MIDI” on page E-30 for

details.

Sustain jack Terminal

You can connect an optional sustain pedal (SP-3 or SP-20) to

the SUSTAIN jack terminal to enable the capabilities

described below.

Sustain Pedal

• With piano tones, depressing the pedal causes notes to

linger, much like a piano’s damper pedal.

• With organ tones, depressing the pedal causes notes to

continue to sound until the pedal is released.

Accessories and Options

Use only the accessories and options specified for this

keyboard. Use of non-authorized items creates the danger of

fire, electrical shock, and personal injury.

SUSTAIN jack Terminal

SP-20

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio CTK-700 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio CTK-700

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info