Bedienungsanleitung Casio CTK-7000 (Seite 13 von 168) (Englisch)

466801

Zoom out

Zoom in

Vorherige Seite

1/168

Nächste Seite

E-11

Connections

Using headphones cuts off output from the built-in speakers,

which means you can practice playing even late at night

without disturbing others.

• Be sure to turn down the volume level before connecting

headphones.

• Headphones do not come with the Digital Keyboard.

• Use commercially available headphones.

• Do not listen to very high volume output over

headphones for long periods. Doing so creates the risk

of hearing damage.

• If you are using headphones that require an adaptor

plug, make sure you do not leave the adaptor plugged

in when removing the headphones.

Connecting an optionally available pedal let’s you perform

pedal operations that add more versatility to your keyboard

play. For information about the types of effects that can be

applied by pressing the pedal, see “Ped.Assign (Pedal

Assign)” (page E-131).

You can connect audio equipment or a music amplifier to the

Digital Keyboard and then play through external speakers for

more powerful volume and better sound quality.

• Whenever connecting a device to the Digital Keyboard,

first use the L-2 (MAIN VOLUME) knob to set the

volume to a low level. After connecting, you can adjust

the volume to the level you want.

• Whenever you connect any device to the Digital

Keyboard, be sure to read the user documentation that

comes with the device.

Use commercially available connecting cords to connect the

external audio equipment to the Digital Keyboard’s T-9 (LINE

OUT) jacks as shown in Figure 1. LINE OUT R jack output is

right channel sound, while LINE OUT L/MONO jack output is

left channel sound. It is up to you to purchase connecting

cords like the ones shown in the illustration for connection of

audio equipment. Normally in this configuration you must set

the audio equipment’s input selector to the setting that

specifies the terminal (such as AUX IN) to which the Digital

Keyboard is connected. Use the L-2 (MAIN VOLUME) knob

to adjust the volume level.

Use a commercially available connecting cord to connect the

amplifier to either of the Digital Keyboard’s T-9 (LINE OUT)

jacks as shown in Figure 2. LINE OUT R jack output is right

channel sound, while LINE OUT L/MONO jack output is left

channel sound. Connecting to the LINE OUT L/ MONO jack

only outputs a mixture of both channels. It is up to you to

purchase a connecting cord like the one shown in the

illustration for connection of the amplifier. Use the L-2 (MAIN

VOLUME) knob to adjust the volume level.

Connecting Headphones

Connecting a Pedal

T-4 (PHONES) jack

T-3 (SUSTAIN/ASSIGNABLE JACK)

Outputting Digital Keyboard

Sound to Audio Equipment or an

Amplifier

Outputting Keyboard Notes to Audio

Equipment 1

Outputting Keyboard Notes to a Musical

Instrument Amplifier 2

INPUT 1

INPUT 2

Audio amplifier AUX IN jack, etc.

Pin plug

LEFT (White)

Standard plug

Guitar amplifier

Keyboard amplifier, etc.

RIGHT (Red)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio CTK-7000 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio CTK-7000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info