Bedienungsanleitung Casio CTK-7300IN (Seite 152 von 168) (Englisch)

586786

152

Zoom out

Zoom in

Vorherige Seite

1/168

Nächste Seite

Reference

E-151

Notes keep sounding, without stopping. • Turn power off and then back on to initialize all Digital Keyboard settings (page

E-13).

• Replace the batteries with new ones or switch over to AC adaptor power (page

E-9).

Some notes are cut off while they are

playing.

Notes are cut off whenever the number of notes being sounded exceeds the

maximum polyphony value of 64 (21 to 32 for some tones). This does not indicate

malfunction.

The volume or tone setting I configured

has changed.

• Adjust the volume setting (page E-13).

• Turn power off and then back on to initialize all Digital Keyboard settings (page

E-13).

• Replace the batteries with new ones or switch over to AC adaptor power (page

E-9).

Output volume does not change even

though I change my keyboard pressure.

• Change the Touch Response setting (page E-132).

• Turn power off and then back on to initialize all Digital Keyboard settings (page

E-13).

In certain keyboard ranges, the volume

and tone quality sound are slightly

different from those in other keyboard

ranges.

This is due to system limitations. It does not indicate malfunction.

With some tones, octaves do not change

at the far ends of the keyboard.

This is due to system limitations. It does not indicate malfunction.

The pitch of the notes does not match

other accompanying instruments or

sounds strange when played along with

other instruments.

• When the B indicator is displayed, it means that the transpose setting

(page E-18) has been used to change the pitch of the keyboard. Return the

transpose setting to 00.

• When the C indicator is displayed, it means that the scale setting (page

E-21) has been used to change the Digital Keyboard’s initial default setting. Use

the procedure under “To select a preset scale” (page E-21) to change to the

“Equal” preset scale.

• Turn power off and then back on to initialize all Digital Keyboard settings (page

E-13).

The reverb of notes seems to change

suddenly.

• Check and adjust the reverb setting (page E-31).

• Turn power off and then back on to initialize all Digital Keyboard settings (page

E-13).

Operation

Tone, rhythm, and other settings revert to

their initial defaults whenever you turn on

the Digital Keyboard.

The Digital Keyboard may be configured to restore default settings (factory default

settings or settings registered by you) when power is turned on. If you want the

Digital Keyboard to remember its last setup and restore it the next time it is turned

on, select “on” for the Auto Resume setting (page E-134).

Computer Connection

I can’t exchange data between the Digital

Keyboard and a computer.

• Check to make sure that the USB cable is connected to the Digital Keyboard and

computer, and that the device is selected correctly with your computer’s music

software settings (page E-145).

• Turn off the Digital Keyboard and then exit the music software on your computer.

Next, turn the Digital Keyboard back on and then restart the music software on

your computer.

Symptom Action

CTK7300IN_e.book 151 ページ２０１３年７月１９日　金曜日　午後１２時１分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio CTK-7300IN Seite 152

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info