Bedienungsanleitung Casio CTK-800 (Seite 51 von 69) (Englisch, Spanisch)

462312

Zoom out

Zoom in

Vorherige Seite

1/69

Nächste Seite

E-49

Connection to a Computer

706A-E-051A

NAVIGATE CHANNEL (Default: 4)

When messages are received from a computer for play on

this keyboard, the navigate channel is the channel whose note

data appears on the display. You can select one channel from

01 to 16 as the navigate channel. Since this setting lets you

use the data on any channel of commercially available SMF

data to light on the on-screen keyboard guide, you can

analyze how different parts of an arrangement are played.

Press the SETTING button until the NAVIGATE

CHANNEL screen appears.

Use the [+], [–], and the number buttons [0] through

[9] to change the channel number.

Example: To specify channel 2

To turn off specific sounds before playing back tune data

that is being received

<<Navigate channel on/off>>

While playing tune data, press the RIGHT/TRACK

2 button.

• This cuts the sound of the navigate channel, but on-

screen keyboard guide keys continue to light in

accordance with the channel’s data as it is received.

Press RIGHT/TRACK 2 button again to turn the

channel back on.

<<Next lower channel from navigate channel on/off>>

While playing tune data, press the LEFT/TRACK 1

button.

• This cuts the sound of the channel whose number is

one less than the navigate channel, but on-screen

keyboard guide keys continue to light in accordance

with the channel’s data as it is received. Press LEFT/

TRACK 1 button again to turn the channel back on.

Example: If the navigate channel is channel 4, the above

operation turns off channel 3.

NOTE

• This keyboard supports SMF 0 and 1 format data.

• Voice Fingering Guide, on-screen fingering indicators,

voice announcement of evaluation points, and the

Practice Phrase function are not supported for SMF data

you purchase or create.

General MIDI Tone

The General MIDI standard defines the tone numbering

sequence, the drum sound numbering sequence, the number

of MIDI channels that can be used, and other general factors

that determine the sound source configuration. Because of

this, musical data produced on a General MIDI sound source

can be played back using similar tones and identical nuances

as the original, even when played on another manufacturers

sound source.

This keyboard conforms with General MIDI standards, so it

can be connected to a computer and used to play back General

MIDI data that has been purchased, downloaded from the

Internet, or obtained from any other source.

Changing the Settings

This section tells you how to make the settings required when

connecting to a computer.

KEYBOARD CHANNEL (Default: 1)

The keyboard channel is the channel used to send messages

from this keyboard to a computer. You can specify one channel

from 1 to 16 as the keyboard channel.

Press the SETTING button until the KEYBOARD

CHANNEL screen appears.

Use the [+], [–], and the number buttons to change

the channel number.

Example: To specify channel 4

av i .

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio CTK-800 Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio CTK-800

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info