Bedienungsanleitung Casio E115 (Seite 55 von 67) (Englisch)

27056

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite

Once you have created the connection, it appears in , Programs, Connections. To start the

connection, remove your Pocket PC from the cradle, tap the connection icon, enter your user

name, domain, and password, and tap Connect. Once connected, you can:

• Send and receive e-mail messages by using Inbox. Before you can use Inbox, you need to

provide the information it needs to communicate with the e-mail server. For specific

instructions, see “Connect Directly to an E-mail Server,” later in this chapter.

• Visit Internet or intranet Web pages by using Pocket Internet Explorer. You may need to set up

a proxy server to visit Internet Web pages. For more information on setting up a proxy server,

see Pocket Internet Explorer Help on the Pocket PC.

• Synchronize. For more information, see ActiveSync Help on the desktop computer.

To create an Ethernet connection to a network

You do not need to create a new connection on your Pocket PC. Instead, you must purchase and

configure an Ethernet card that is compatible with your Pocket PC.

1. Get the following information from your network administrator: user name, password, and

domain name.

2. Insert the Ethernet card into your Pocket PC. For instructions on inserting and using the

Ethernet card, see the owner’s manual for the card.

3. The first time you insert the card, Network Settings will appear automatically so that you can

configure the Ethernet card. Most networks use DHCP, so you should not have to change these

settings unless your network administrator instructs you to do so. Tap OK. (If it does not

appear or to change settings later, tap

and then Settings. On the Connections tab, tap

Network and then the adapter you want to change.)

4. Connect the Ethernet card to the network by using a network cable. For information, see your

owner’s manual.

5. If you want to synchronize your Pocket PC, tap

, and then Programs. Tap the Connections

folder, and then ActiveSync. Select Network Connection as the connection method and then

tap Connect. Remote synchronization with a desktop computer will work only if you have set

up a partnership with that computer through ActiveSync and have set ActiveSync to allow

remote connections. Other restrictions apply. For more information on synchronizing remotely,

see ActiveSync Help on the desktop computer.

6. If you want to access your e-mail server or the intranet, tap

and then Settings. On the

Connections tab, tap Network and then the Identification tab. Enter your user information. If

you need assistance, see your network administrator.

Once connected, you can do the same activities as listed in the preceding section.

End a Connection

If you started the connection from a program, such as Inbox or Pocket Internet Explorer,

disconnect from that program first. Then, tap

and then Today. Tap or at the bottom of

the screen and then Disconnect. To end a network connection, remove the card from your Pocket

PC.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio E115 Seite 55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info