Bedienungsanleitung Casio E200 (Seite 54 von 65) (Englisch)

27058

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

7. You should not need to change any settings in Advanced. Most ISPs now use a dynamically-

assigned address. If the ISP you are connecting to does not use a dynamically-assigned

address, tap Advanced and then the TCP/IP tab, and enter the address. When finished, tap

OK and then Next.

8. Enter the access phone number, and tap Next.

9. Select other desired options, and tap Finish.

10.In the Dialing Locations tab, specify your current location and phone type (most phone lines

are tone). These settings will apply to all connections you create.

To start the connection, simply start using one of the following programs. Your device will

automatically begin connecting. Once connected, you can:

• Send and receive e-mail messages by using Inbox. Before you can use Inbox, you need to

provide the information it needs to communicate with the e-mail server. For specific

instructions, see “Connect Directly to an E-mail Server,” later in this chapter.

• Visit Web and WAP pages by using Pocket Internet Explorer. For more information, see

Chapter 7.

• Send and receive instant messages with MSN Messenger. For more information, see Chapter 6.

To create an Ethernet connection to an ISP:

1. You do not need to create a new connection on your Pocket PC. Instead, you must purchase

and configure an Ethernet card that is compatible with your Pocket PC.

2. Obtain the following information from your ISP: user name, password, and domain name.

3. Insert the Ethernet card into your device. For instructions on inserting and using the Ethernet

card, see the owner’s manual for the card.

4. The first time you insert the card, Network Settings will appear automatically so that you can

configure the Ethernet card. Most networks use DHCP, so you should not have to change these

settings unless your network administrator instructs you to do so. Tap OK. (If it does not

appear or to change settings later, tap

and then Settings. In the Connections tab, tap

Network, tap the adapter you want to change, and then tap Properties.)

5. Connect the Ethernet card to the network by using a network cable. For information, see your

owner’s manual.

6. Tap

, Settings, Connections tab, and then Connections. From the My network card

connects to list, select The Internet.

To start the connection, simply start using one of the programs listed in the preceding section.

Once connected, you can perform the same activities as listed in the preceding section.

Connect to Work

If you have access to a network at work, you can send e-mail messages, view intranet pages,

synchronize your device, and possibly access the Internet. You can connect to work in one of two

ways:

• Create a modem connection by using a RAS account. Before you can create this modem

connection, your network administrator will need to set up a RAS account for you. If this is the

method you want to use, see “To create a modem connection to a network.” Your network

administrator may also give you VPN settings.

• Use an Ethernet card and a net tap to connect to the network. If this is the method you want to

use, see “To create an Ethernet connection to a network.”

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio E200 Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info