740143
5
Zoom out
Zoom in
Vorherige Seite
1/31
Nächste Seite
TIME+DAILY: Current Time + Weekly
Information
This screen shows the current time and your
weekly step count.
Daily steps
Daily step count goal progress
TIME+MONTHLY: Current Time + Monthly
Information
This screen shows the current time and your
running distance during the currently selected
month. Instead of running distance, you could
also specify display of running time. Note that
you must use “G-SHOCK MOVE” to specify
which item (running distance or running time)
should be displayed.
1 month’s running distance or running time
Monthly step count goal progress
TIME+WORLD TIME: Current Time +
World Time
World Time City
World Time
Viewing the Face in the Dark
The watch has a light that illuminates the face
for viewing in the dark.
To illuminate the face manually
Press (B) to turn on illumination.
Illumination will turn off automatically if an
alarm starts to sound.
Using Auto Light
If Auto Light is enabled, face illumination will
turn on automatically whenever the watch is
positioned at an angle of 40 degrees or more.
40
degrees
or more
Important!
Auto Light may not operate properly
when the watch is at a horizontal angle
of 15 degrees or greater from
horizontal as shown in the illustration
below.
Electro-static charge or magnetism
can interfere with proper auto light
operation. If this happens, try lowering
your arm and then angle it towards
your face again.
When moving the watch you may note
a slight rattling sound. This is due to
operation of the auto light switch,
which determines the current
orientation of the watch. It does not
indicate malfunction.
Note
Auto Light is disabled when any one of
the conditions below exists.
While an alarm sound, timer sound,
and/or vibration operation is in
progress
If you do not disable it manually, Auto
Light remains enabled for
approximately six hours. After that, it
becomes disabled automatically.
Configuring the Auto Light Setting
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
Pointer
3. Use (A) and (D) to move the pointer to
[LIGHT].
4. Press (C).
5. Use (A) and (D) to move the pointer to
[AUTO LIGHT].
6. Press (C).
7. Use (A) and (D) to move the pointer to
[OFF] (disabled) or [ON] (enabled).
The [LT] indicator is displayed in the
Timekeeping Mode while Auto Light is
enabled.
8. Press (C) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the illumination
setting screen will re-appear.
9. Press (E) twice to exit the setting screen.
Operation Guide 3481
5
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Casio G-SHOCK GBD-100 - QW-3481 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Casio G-SHOCK GBD-100 - QW-3481

Casio G-SHOCK GBD-100 - QW-3481 Bedienungsanleitung - Deutsch - 31 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info