Bedienungsanleitung Casio G-SHOCK GBD-100 - QW-3481 (Seite 9 von 31) (Englisch)

740143

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

●

Pair the watch with a phone.

Before you can use the watch in combination

with a phone, you first need to pair them.

Tap the “G-SHOCK MOVE” icon.

Follow the instructions on the display to

advance to the initial setup screen.

This will display a message telling you to

connect with the watch.

●

If your phone is already paired with

another watch

On the menu bar, tap “More”.

Tap “Watch”.

Tap “Manage”.

Perform the operation shown on

the screen to prepare to add a new

watch.

Enter the Timekeeping Mode.

Navigating Between Modes

Hold down (A) for at least two seconds.

This displays the Timekeeping Mode

setting screen.

Pointer

Use (A) and (D) to move the pointer to

[PAIRING].

Press (C).

Use (A) and (D) to move the pointer to

[CONNECT].

Press (C).

9. Move the phone to be paired with close to

(within one meter of) the watch.

10.

When the watch you want to pair with

appears, follow the instructions on the

display to pair with it.

●

If a pairing prompt message appears,

perform the operation shown on the

phone screen.

●

If pairing fails for some reason, the

watch will return to the state in step 5 of

this procedure. Perform the pairing

procedure again from the beginning.

Pairing complete.Pairing started.

Note

●

The first time you start up G-SHOCK

MOVE, a message will appear on your

phone asking if you want to enable

location information acquisition.

Configure settings to allow

background use of location

information.

Auto Time Adjustment

Your watch can connect with your phone to

adjust the watch’s time setting.

If you leave your watch in the Timekeeping

Mode, it will perform the adjustment operation

automatically as you go about your daily life,

without any operation required by you.

12:30

Important!

●

The watch may not be able to perform

auto time adjustment under the

conditions described below.

ー

While the watch is too far away from

its paired phone

ー

While communication is not possible

due to radio interference, etc.

ー

While the phone is updating its

system

ー

While G-SHOCK MOVE is not

running on the phone

Note

●

If there is a World Time City specified

with G-SHOCK MOVE, its time will

also be adjusted automatically.

●

Auto time adjustment is performed at

the times described below.

ー

After your phone’s time zone or

summer time setting is changed

ー

After 24 hours or more have passed

since the last time adjustment using

Bluetooth connection

ー

After 24 hours or more have passed

since the last home city change or

time adjustment using watch

operation

●

The watch remains connected with

your phone even after time adjustment

is complete.

●

If time adjustment fails for some

reason, [CONNECT FAILED] will

appear.

●

Watch operation can be performed

even while it is connected with your

phone.

●

Connection with your phone is not

possible while the watch’s Airplane

Mode is enabled. To connect with your

phone, disable the Airplane Mode.

Using the Watch in a Medical

Facility or Aircraft

Operation Guide 3481

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio G-SHOCK GBD-100 - QW-3481 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio G-SHOCK GBD-100 - QW-3481

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info