Bedienungsanleitung Casio GP-300 (Seite 65 von 78) (Englisch, Spanisch)

723293

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

EN-64

Getting Ready

Connect commercially available headphones to the

PHONES jacks. Connecting headphones to either of

the PHONES jack cuts off output to the speakers,

which means you can practice even late at night

without bothering others. To protect your hearing,

make sure that you do not set the volume level too high

when using headphones.

•Be sure to push the headphones plug into the

PHONES jacks as far as it will go. If you don’t, you

may hear sound from only one side of the

headphones.

•If the plug of the headphones you are using does not

match the PHONES jacks, use the applicable

commercially available adaptor plug.

•If you are using headphones that require an adaptor

plug, make sure you do not leave the adaptor

plugged in when you unplug the headphones. If you

do, nothing will sound from the speakers when you

play.

The Headphone Mode reproduces the natural expanse

of sound that reaches the ears when an acoustic piano

is played.

•The Headphone Mode is enabled only while

headphones are being used.

•If external output is used while headphones are

plugged into the PHONE jack, the external output

sound is also the result of Headphone Mode

compensation.

•The Headphone Mode is enabled under initial

default settings. To disable the Headphone Mode,

see “Configuring Settings” on page EN-40, and

“General” 3 “Headphone Mode” in the

“Parameter List” on page EN-41.

You can connect audio equipment or a music amplifier

to the Digital Piano and then play through external

speakers for more powerful volume and better sound

quality.

• The Digital Piano automatically adjusts sound output

to optimize for headphone output (when headphones

are connected) or built-in speaker output (when

headphones are not connected).

• Inserting a plug into the Digital Piano’s LINE OUT R

and/or L/MONO terminal automatically switches to a

timbre suitable for line out. It also automatically

changes the timbre output from the Digital Piano’s

built-in speakers and disables the Volume Sync

Equalizer (page EN-44).

To mute sound output from the speakers, first

disable the Headphone Mode (“Headphone Mode”,

page EN-64) and then plug headphones into the

Digital Piano’s PHONES terminal.

• Whenever connecting a device to the Digital Piano,

first use the VOLUME controller to set the volume to

a low level. After connecting, you can adjust the

volume to the level you want.

• Whenever you connect any device to the Digital

Piano, be sure to read the user documentation that

comes with the device.

Connecting Headphones

Headphone Mode

PHONES jacks

Front

Stereo standard plug

Connecting Audio Equipment

or an Amplifier

INPUT 1

INPUT 2

Guitar amplifier

Keyboard amplifier, etc.

Standard plug

Standard jack

LEFT (White)

RIGHT (Red)

Audio amplifier AUX IN jack, etc.

Pin plug

Other electronic music

instrument,

CD player, audio player, etc.

GP300-ES-1B.indd 66 2016/06/24 10:43:26

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio GP-300 Seite 65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio GP-300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info