709554
16
Zoom out
Zoom in
Vorherige Seite
1/35
Nächste Seite
14
EN
Text Effects
There are three text effects that you can assign: shading, underlining, and
boxed text. The following shows examples of each.
Effect Indicator
Sample
Shading
Underlining
Boxed Text
The text effect indicators will show you when a text effect is being used.
x
You can use the Shading, Underline, and Box effects in combination with
each other, and even specify all three at the same time.
To specify a text effect
1. Press
FUNC
and then to display a menu of text effects.
2. Use and to move the pointer to the effect you want to use.
x
To delete a currently applied effect, select
NONE
.
3. Press
OK
to apply the settings and return to the text screen.
x
To apply multiple effects, repeat the above from step 1.
Part 5 Printing
Printing Precautions
x
Never turn power off while printing is being in progress.
x
Make sure that the tape outlet is not blocked before you start printing.
x
Never operate the tape cutter while printing is being in progress (indicated
by the message “NOW PRINTING” on the display).
Important!
x
Never touch the tape cutter while a tape cut operation is being in progress.
Doing so can result in cuts and other personal injury.
Printing a Tape
Printing a tape is as easy as pressing the key.
To display the print preview
1. Press
FUNC
and then .
x
The print image that appears scrolls on the display for easy viewing.
2. To stop the scrolling, press
OK
. Press
OK
again to restart scrolling.
x
After the preview (scrolling) operation is complete, the tape length
will appear on the display for a short while, and then the display will
automatically return to the screen that was shown before you performed
step 1, above.
x
To cancel preview part way through, press
.
To print a tape
1. While the text input screen is displayed, press .
x
This will display the tape length, followed by a screen for specifying the
number of copies.
2. Use
and , to specify the number of copies.
x
You can also input a value for the number of copies.
3. Press
OK
to start printing.
x
To stop a print operation that is in progress, press
.
4. After the print operation is complete, press down on the tape cutter button
to cut the tape.
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Casio KL-130 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info