Bedienungsanleitung Casio KL7200E (Seite 17 von 29) (Englisch)

506036

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

E-16

Part 6 Printing

This part of the manual includes all the information you need to print tapes. It

also tells you how to print special stamp tapes that you can attach to an optional

stamp holder to create your own original stamps.

Printing Precautions

• Never turn power off while printing is being performed.

• Make sure that the tape outlet is not blocked before you start printing.

• Never operate the tape cutter while printer is being performed (indicated by

the message “NOW PRINTING” on the display).

• During printing at very high density, printing of very long text, or repeat printing

of the same text a number of times, the Label Printer may stop printing for

about five seconds. This is not a malfunction, and normal printing should

resume shortly (indicated by the message “NOW PRINTING” on the display).

Important!

• Never touch the tape cutter while a tape cut operation is being performed.

Doing so can result in cuts and other personal injury.

Printing a Tape

Printing a tape is as easy as pressing the PRINT key.

To print a tape

1. Press the PRINT key to print a tape of the text you have input and laid out.

• To stop a print operation that is in progress, press ESC.

2. After the print operation is complete, press down on the tape cutter button to

cut the tape.

3. Use scissors to trim the tape to the size you want, if necessary.

• After you print a tape, you can peel off its paper

backing and stick the tape onto the object you

want. Note that the tape will not stick on coarse,

wet, oily, or soiled surfaces. Also, you should not

try to use the tape where it is exposed to direct

sunlight or rain. Do not stick the tape onto human

skin.

• An easy way to remove the backing from a tape

and expose the adhesive surface is to bend the

tape near one of its ends. This should cause the

tape and its backing to separate, allowing you to

pull them apart.

Mirror Image Printing

When you specify mirror image for text, it is printed in reverse image. Use mirror

image when you plan to print on transparent tape, with the printing on the inside.

When viewed through the transparent tape, the text will appear normal. You

can also use mirror image printing when using iron-on transfer tape to print iron-

on transfers.

Normal

Mirror Image

To turn mirror image printing on and off

1. Press FUNC and then 6 (MIRROR).

OFF ON

2. Press H or J to change the setting shown on the display between ON

(mirror printing) and OFF (normal).

3. When the mirror image printing setting is the way you want it, press SET to

• A mark appears next to the MIRROR indicator on the display when mirror

printing is turned on.

• After you turn printing on, input text and perform the print operation as you

normally do to produce mirror image tapes.

Other Printing Features and Operations

The following are other operations and settings that you may need to use when

printing.

Tape

Backing

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio KL7200E Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio KL7200E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info