Bedienungsanleitung Casio KL7200E (Seite 21 von 29) (Englisch)

506036

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

E-20

Printing a Bargain Label

The following example shows how you can print a discount label that calculates

a mark down rather than a currency conversion.

Label for 30% discount

To perform the calculation and print the label

CURRENCY A NOW

CURRENCY B (Blank)

RATE 0.7 (–30%)

ROUND 2 (Round to two decimal places)

FORMAT 1

PRINT PRINT B → A

1. Press FUNC SPACE (RATE), input the value that the original price should

be multiplied by in order to produce the discounted price, and then press

SET.

• In our example, we want to produce a 30% (.30) discount, so we specify a

multiplier of .70.

2. Press FUNC CAPS (FORMAT).

3. Use H or J to select CUR, and then press SET.

4. Input the name of Currency A (CURR A), and then press SET (“NOW” in this

example).

5. In this example, make sure Currency B (CURR B) is blank (nothing is input),

and then press SET.

6. Press FUNC CAPS (FORMAT).

7. Use H or J to select RND, and then press SET.

8. Use H or J to select the rounding (2 in this example), and then press SET.

9. Press FUNC CAPS (FORMAT) to set the format.

10.Use H or J to select FMT, and then press SET.

11.Use H or J to select the number of the format you want to use, and then

press SET.

12.Input the text you want to use (“SPECIAL!” in this example).

13.Press FUNC SYMBOL (PRINT B → A), input the original price (10.00 in this

example), and then press SET.

Type

ST-15

ExampleMaximum Stamp Size

5.5cm

9.3cm

5.5cm

18mm

10mm

Part 9 Stamp Printing

The stamp printing feature lets you print on special stamp tape. You can then

attach the finished stamp tape to an optionally available stamp holder to create

your own original pre-inked stamps. The following is the type of stamp holder

currently available for use with stamp tapes.

Note the following important points about stamp printing.

• Stamp printing prints text in mirror image.

• You can perform stamp printing only when 18mm is specified as the tape width.

• An error message “STAMP ERROR!” appears on the display and the Label

Printer refuses to print whenever you try to print text that is longer than the

maximum length you specify.

To print a stamp tape

1. Input the text you want to print.

2. Press FUNC and then 2 (STAMP).

PR I NT?

• An error message (page E-24) appears if the text that you input in step 1 is

too long to fit within the maximum length you specified.

3. Press SET to print the stamp tape or ESC to abort the print operation and

return to the text input display in step 1.

• After the printing is complete, the Label Printer returns to the input display in

step 1.

4. Cut off the tape and affix it to the optional stamp holder.

• See the instructions that come with the optional stamp holder for information

about how to attach the stamp tape.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio KL7200E Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio KL7200E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info