Bedienungsanleitung Casio KL820 (Seite 17 von 45) (Englisch)

506033

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

E-16

To delete characters using the DEL key

Example: To change the word “commmputer” to “computer”.

1. Use c and v to move the cursor under the first (far left) “m”.

2. Press DEL twice to delete the two m’s at the cursor’s position, shifting “mputer”

to the left as you do.

3. Press FUNC and then v to jump back to the end of the characters for more

input.

Clearing the Display

Use the following procedure to clear all input text from the display.

To clear the display

Press FUNC and then DEL (CLS).

At this time the message “CLEAR? SET/ESC” appears on the display to confirm

that you want to clear the display. Press SET to clear or ESC to abort the operation

without clearing anything.

Text Editing

You can use the following procedures to edit text on the display.

To insert new characters

Example: To change the text “ABCDEF” to “ABCXYZDEF”.

1. With the original text on the display, move the cursor under the letter “D”.

2. Input the new characters (XYZ).

• Inputting the new characters causes them to be inserted at the cursor position.

The existing characters are opened up to make room for the new characters.

To change existing characters to different ones

Example: To change the text “ABCDEF” to “XYZDEF”.

1. With the original text on the display, use either the BS key or DEL key to

delete the characters to be changed (ABC).

2. Input the new characters (XYZ).

Part 4 Deleting and Inserting Characters

This section describes everything you need to know about deleting and editing

characters you have already input.

Moving the Cursor

Use the cursor keys to move the cursor around the display and position it for

deleting and editing characters.

To move the cursor

• Press c to move the cursor to the left, and v to move the cursor to the right.

• Press x to move the cursor to the up, and z to move the cursor to the down.

• Press FUNC and then c to make the cursor jump to the beginning (far left) of

the characters on the display.

• Press FUNC and then v to make the cursor jump to the end (far right) of the

characters on the display.

• Holding down the c, v, x or z cursor key moves the cursor at high speed.

Deleting Individual Characters

You can delete individual characters with either the BS key or the DEL key. The

only difference between the operation of these two keys is the location of the

cursor.

To delete characters using the BS key

Example: To change the word “CASSSIO” to “CASIO”.

1. Use c and v to move the cursor under “I”.

CAS S IOS

2. Press BS twice to delete the two S’s to the left of the cursor, shifting “IO” to

the left as you do.

3. Press FUNC and then v to jump back to the end of the characters for more

input.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio KL820 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio KL820

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info