Bedienungsanleitung Casio KL8200 (Seite 7 von 36) (Englisch)

506039

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

E-6

• Use only an adaptor, and make sure the adaptor has the

same voltage rating as the household current in your area.

Using a wrong adaptor can damage your label printer.

• Be sure to turn the label printer off before you connect the

adaptor. Do not turn power on until the adaptor is con-

nected to the label printer and plugged into an AC outlet.

To connect the AC adaptor

Connect the adaptor to the label printer as illustrated below.

Plug the other end into a standard household AC outlet.

After you finish using the label printer, turn it off and discon-

nect the AC adaptor.

• Be sure to grasp the plug of the AC adaptor cord when

disconnecting it. Never pull on the cord.

Memory Back-up Battery

The CR2032 battery that provides memory back-up power

must be replaced whenever the following low battery mes-

sage appears.

ETTABP

–

!KAE

ITTE

ELP

ESA

PER

CALIE

Important! The back-up battery can burst or leak and dam-

age your unit if you do not use it correctly. Note the following

important points.

• Be sure that the plus (+) side of the battery is facing up

(so you can see it) when you install it in the label printer.

• Never leave a dead battery in the label printer.

• Remove the battery if you do not plan to use the label

printer for a long time.

• Replace the battery as soon as the low battery message

appears.

• Replace battery at least once a year, even if the low bat-

tery message does not appear during that time.

Warning!

• Never use a recharged battery.

• Do not expose a battery to direct heat, do not short circuit

it, and do not try to take it apart.

• Keep batteries out of the reach of small children. If swal-

lowed, consult with a physician immediately.

To replace the memory back-up battery

1. Turn power off and make sure that the AC adaptor is

connected to the label printer.

2. Remove the screw on the back of the label printer that

holds the battery compartment cover in place, and re-

move the cover.

3. Remove the old battery.

4. Load a new battery, making sure that its positive (+) side

is facing up (so you can see it).

5. Replace the battery compartment cover.

Turning Power On and Off

Press ON to turn power on, and OFF to turn power off.

Important! If you are using the label printer for the first time,

you should reset it first.

Power On Recall Function

Whenever you turn power off, any input that is on the dis-

play is automatically stored in memory. Then the next time

you turn on power, the message “[SET] TO RECALL” ap-

pears on the display. Pressing SET when this message is

on the display recalls the text that was on the screen when

you last turned off power.

• Pressing any key besides SET, FUNC, SHIFT or CODE

clears the text from memory.

Resetting the Memory

You should reset the memory of the label printer before us-

ing it for the first time, after you have not used it for a long

time, or if nothing happens when you turn power on.

Important! Resetting label printer memory clears its

memory of all input data.

To reset the memory

1. Make sure that label printer power is off.

2. While holding down the PRINT and ESC keys, press ON

to turn power on.

?LA

CSE

TES

3. Press SET to initialize the label printer or ESC to abort

the reset operation without initializing anything.

• See “Initial Settings” on page E-29 for information on the

initial default settings of the label printer following the re-

set operation.

Auto Power Off Function

If you do not perform any key operation for about six min-

utes, the label printer automatically turns power off. To re-

store power, press ON.

Tape Cartridges

Use the procedures described below to load a tape car-

tridge into the label printer. The label printer automatically

detects what size tape is loaded.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio KL8200 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio KL8200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info