Bedienungsanleitung Casio KL8200 (Seite 16 von 36) (Englisch)

506039

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

E-15

About the format menu

The format that appears in the following procedure uses

symbols to indicate character sizes in each line of text. The

formats that appear depend on the width of the tape loaded

in the label printer and the number of lines in the block of

text where the cursor is located when you press the SIZE

key. The following shows all of the formats available for each

tape width and the number of lines of text.

• Note that with the preset formats, all character sizes have

the same vertical and horizontal measurements.

24mm and 18mm tape, 1 line of text

1 × 1

2 × 2 3 × 3

4 × 4 5 × 5

24mm and 18mm tape, 2 lines of text

1 × 1/1 × 1

1 × 1/2 × 2

2 × 2/1 × 1 2 × 2/2 × 2

1 × 1/3 × 3 3 × 3/1 × 1

24mm and 18mm tape, 3 lines of text

1 × 1/1 × 1/1 × 1

1 × 1/1 × 1/2 × 2

1 × 1/2 × 2/1 × 1 2 × 2/1 × 1/1 × 1

12mm tape, 1 line of text

1 × 1 2 × 2 3 × 3

9mm tape, 1 line of text

1 × 1 2 × 2

Important! You can use preset formats to specify charac-

ter sizes for lines of text only when there is no character

size specification already made inside of the text. If you press

the SIZE key while the cursor is located inside of a block

that already contains a character size indicator, the FOR-

MAT item will be dimmed on the SIZE menu, which means

it cannot be selected.

To specify character sizes for lines of text

using preset formats

1. While the cursor is located inside of the block of text where

you want to use the preset formats, press SIZE.

–––––

EZIS

–––––

EZIS

• See page E-16 for details about blocks.

2. Use u and i to highlight “FORMAT” and then press

SET.

–––––

EZIS

–––––

–

• The FORMAT menu appears with all of the preset for-

mats that are available in accordance with the number

of text lines there are in the block where you located the

cursor, and with the width of the tape loaded in the label

printer.

3. Use u, i, t and y to move the highlighting to the

format that you want to use and then press SET to select

it.

• At this point, the label printer returns to the text input

screen.

To find out preset format character sizes

Use the t and y cursor keys to move the cursor around the

display. The character size indicator shows the current size

setting for the character where the cursor is located.

About Auto Sizing

If you do not specify a character size, the label printer auto-

matically selects the optimum size in accordance with the

width of the tape you are using. If you are using frames

(page E-19), characters are automatically balanced with the

type of frame being used.

The following are examples of how auto sizing works.

Important! Remember that changing the tape cartridge

may make it impossible to print text if there are too many

lines. Note the following relationships between tape width

and the number of text lines.

(See page E-19)

24 mm

18 mm

12 mm

9 mm

6 mm

1 line

6 lines max.

3 lines max.

1 line max.

8 lines max.

5 lines max.

4 lines max.

2 lines max.

Tape Width Plain Text Print Area Frame Character Frame

Auto Fit

1 × 1 (Manual Setting)

Tape

width

6 mm

9 mm

12 mm

18 mm

24 mm

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio KL8200 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio KL8200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info