Bedienungsanleitung Casio KLC500 (Seite 19 von 52) (Englisch)

506040

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

E-18

2. Move the cursor to the start block from which

you want to change the font and then press

SET to register your selection.

3. Move the cursor to the end block up to which you want to change the font

and then press SET to register your selection and change the font.

• At this point, the label printer returns to the text input screen.

To change the font for lines of text

1. After performing the two steps under “To change the font for displayed text”,

use u and i to highlight “LINE” and then press SET.

2. Move the cursor to the start line from which you want to change the font and

then press SET to register your selection.

3. Move the cursor to the end line up to which you want to change the font and

then press SET to register your selection and change the font.

• At this point, the label printer returns to the text input screen.

To change the font for specific characters

1. After performing the two steps under “To change the font for displayed text”,

use u and i to highlight “CHARACTER” and then press SET.

2. Move the cursor to the start character from which you want to change the

font and then press SET to register your selection.

3. Move the cursor to the end character up to which you want to change the

font and then press SET to register your selection and change the font.

• At this point, the label printer returns to the text input screen.

To find out current font settings

Use the t and y cursor keys to move the cursor around the display. The font

indicator shows the current font setting for the character where the cursor is

located.

Important! Neighboring characters with different font settings, may overlap

on the printed tape. You can correct for this by changing the PITCH setting on

the BLOCK FORMAT menu (see page E-25), or by inputting a space between

the overlapping characters.

Character Styles

There are ten character styles: normal, bold, outline, shadow, raised, italic, italic-

bold, italic-outline, italic-shadow, and italic-raised.

The following sections describe how to change the character style for displayed

text, and how you can find out what the character style setting is for text on the

display.

To change the character styles

1. While there is text on the display, press

STYLE.

2. Use u and i to highlight the style you want

to change to and then press SET.

• What you should do next depends on the

range you want to use.

• The range setting procedures are the same

as those for font range settings.

ALL: See “To change the font for all the text”.

BLOCK: See “To change the font for blocks of text”.

LINE: See “To change the font for lines of text”.

CHARACTER: See “To change the font for specific characters”.

Important! Normal and Italic style settings can be applied to illustrations

(ILLUST).

The following table shows how STYLE settings affect illustrations (ILLUST).

STYLE SETTING

Normal

Italic

Bold

Outline

Shadow

Raised

Italic+Bold

Italic+Outline

Italic+Shadow

Italic+Raised

EFFECT ON

ILLUSTRATIONS

Normal

Italic

Normal

Italic

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio KLC500 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio KLC500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info