Bedienungsanleitung Casio LK-70S (Seite 44 von 59) (Englisch)

466861

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

E-42

653A-E-044B

Using a SmartMedia Card

Reading a SmartMedia card

NOTE

•SMF data is converted to a format that can be played by

this keyboard, and then stored in keyboard memory.

Whether or not the data can fit in keyboard memory

depends on the size of the converted data.

Press the CARD button.

Use the number buttons to input the two-digit

number that corresponds to the SMF data you want

to select.

•Use the [+] and [–] buttons to input a data number

that has more than two digits.

Perform one of the following operations.

IMPORTANT!

All of the following points apply whenever you perform

any one of the operations described below.

•If there is no data currently stored in User Song areas

60 through 64, the applicable SMF data will be loaded

automatically into User Song area 60 of the keyboard’s

SONG BANK. After that, the keyboard will enter the Song

Bank mode automatically, select area 60, and start

playback.

•If there is data already stored in User Areas 60 through

64, a confirmation message will appear asking if you

want to replace all of the existing data. The existing data

must be deleted in order to load the SMF data.

•To delete the data, press the [+] button. This will delete

the data, automatically enter the Song Bank Mode, and

start playback of the data.

•To cancel the delete operation, press the [–] button.

■To play back SMF data

-1 Press the START/STOP button.

•If an error message appears, see “SmartMedia Card

Error Messages” on page E-43 for information

about what you need to do.

■To sing along with SMF data

-1 Press the PLAY/STOP button.

•If an error message appears, see “SmartMedia Card

Error Messages” on page E-43 for information

about what you need to do.

•Playback volume is lower for SMF data part that is

assigned to Channel 4.

■To use SMF data in a 3-Step Lesson

-1 Press the STEP 1, STEP 2, or STEP 3 button.

•If an error message appears, see “SmartMedia Card

Error Messages” on page E-43 for information

about what you need to do.

•The channel specified as the navigate channel is

assigned to the right-hand part, while the channel

that is one less than the channel specified as the

navigate channel is assigned to the left-hand part.

•Voice Fingering Guide and on-screen fingering

indicators are not supported for SMF data.

■To evaluate your play using SMF Data

-1 Press the SCORING button.

•If an error message appears, see “SmartMedia Card

Error Messages” on page E-43 for information

about what you need to do.

•The channel specified as the navigate channel is

assigned to the right-hand part, while the channel

that is one less than the channel specified as the

navigate channel is assigned to the left-hand part.

•On-screen fingering indicators are not supported

for SMF data.

Press the START/STOP button to stop SMF data play.

LK70S_e_32-44.p65 04.8.18, 11:04 AM42

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio LK-70S Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio LK-70S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info