Bedienungsanleitung Casio MZ-X300 (Seite 11 von 82) (Englisch, Spanisch)

723299

Zoom out

Zoom in

Vorherige Seite

1/82

Nächste Seite

EN-10

Connections

An external source connected to LINE IN R (right) is

output from the Digital Keyboard’s right speaker,

while a source connected to LINE IN L/MONO is

output from the left speaker. Use commercially

available connection cords that match the equipment

being connected to. When an external source is

connected to LINE IN L/MONO only, the input is

output from both speakers.

You can connect a smartphone or other music player to

AUDIO IN.

Use the AUDIO VOLUME controller to adjust the

volume level of sound input from the AUDIO IN

terminal. This volume level cannot be adjusted using

the 2 VOLUME controller.

•Digital Keyboard built-in effects (reverb, chorus,

DSP) are also applied to sound input from the LINE

IN/MIC IN terminal. LINE IN/MIC IN input can be

recorded with the Audio Recorder.

•Digital Keyboard built-in effects (reverb, chorus,

DSP) are not applied to AUDIO IN terminal input.

AUDIO IN input cannot be recorded with the

Audio Recorder.

Use commercially available cables to connect the

external audio equipment to the Digital Keyboard’s

LINE OUT jacks as shown in Figure . LINE OUT R

jack output is right channel sound, while LINE OUT

L/MONO jack output is left channel sound. It is up to

you to purchase connecting cables like the ones shown

in the illustration for connection of audio equipment.

Normally in this configuration you must set the audio

equipment’s input selector to the setting that specifies

the terminal (such as AUX IN) to which the Digital

Keyboard is connected. Use the Digital Keyboard’s

VOLUME controller to adjust the volume level.

Use commercially available cables to connect the

amplifier to the Digital Keyboard’s LINE OUT jacks as

shown in Figure . LINE OUT R jack output is right

channel sound, while LINE OUT L/MONO jack

output is left channel sound. Connecting to the

LINE OUT L/MONO jack only outputs a mixture of

both channels. It is up to you to purchase a connecting

cable like the one shown in the illustration for

connection of the amplifier. Use the Digital Keyboard’s

VOLUME controller to adjust the volume level.

You can connect an optionally available or

commercially available microphone* to the MIC IN

terminal and output the sound from the microphone

thorough the Digital Keyboard’s speakers.

*Use a dynamic microphone.

You can adjust the volume level of microphone input

with the MIC VOLUME controller. Microphone

volume control is independent from overall keyboard

volume.

• Before connecting a microphone, make sure that the

Digital Keyboard and microphone are turned off.

• Before connecting, set both the VOLUME and MIC

VOLUME controllers to low levels. Adjust volume

settings to appropriate levels after connecting the

microphone.

Using the Digital Keyboard to Produce

Sounds from an External Source

(Figures  and )

Connecting to Audio Equipment

(Figure )

Connecting to a Musical Instrument

Amplifier (Figure )

Outputting Sound from a Microphone

MIC VOLUME controller

MIC IN jack

MZX300_X500-ES-1A.indd 12 2015/10/07 15:46:40

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio MZ-X300 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio MZ-X300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info