Bedienungsanleitung Casio PX-160 (Seite 8 von 38) (Englisch)

586828

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

EN-6

Connections

IMPORTANT!

• Whenever connecting something to the Digital

Piano, first use the VOLUME controller to set the

volume to a low level. After connecting, you can

adjust the volume to the level you want.

Connecting headphones to either of the PHONES jack

cuts off output to the speakers, which means you can

practice even late at night without bothering others. To

protect your hearing, make sure that you do not set the

volume level too high when using headphones.

NOTE

• Be sure to push the headphones plug into the

PHONES jacks as far as it will go. If you don’t, you

may hear sound from only one side of the

headphones.

• If the plug of the headphones you are using does not

match the PHONES jacks, use the applicable

commercially available adaptor plug.

• If you are using headphones that require an adaptor

plug, make sure you do not leave the adaptor

plugged in when you unplug the headphones. If you

do, nothing will sound from the speakers when you

play.

You can connect audio equipment or a music amplifier

to the Digital Piano and then play through external

speakers for more powerful volume and better sound

quality.

IMPORTANT!

• The Digital Piano automatically adjusts sound output

to optimize for headphone output (when headphones

are connected) or built-in speaker output (when

headphones are not connected). This also will cause

a change in the output quality from the Digital

Piano’s LINE OUT R and L/MONO jacks.

• Whenever connecting a device to the Digital Piano,

first use the VOLUME controller to set the volume to

a low level. After connecting, you can adjust the

volume to the level you want.

• Whenever you connect any device to the Digital

Piano, be sure to read the user documentation that

comes with the device.

Connecting to Audio Equipment 1

Use commercially available cables to connect the

external audio equipment to the Digital Piano’s LINE

OUT jacks as shown in Figure 1. LINE OUT R jack

output is right channel sound, while LINE OUT L/

MONO jack output is left channel sound. It is up to

you to purchase connecting cables like the ones shown

in the illustration for connection of audio equipment.

Normally in this configuration you must set the audio

equipment’s input selector to the setting that specifies

the terminal (such as AUX IN) to which the piano is

connected. Use the Digital Piano’s VOLUME controller

to adjust the volume level.

Connecting Headphones

Stereo mini plug

PHONES jacks

Front

Connecting Audio Equipment

or an Amplifier

INPUT 1

INPUT 2

Guitar amplifier

Keyboard amplifier, etc.

Standard plug

To either of the Digital Piano’s LINE OUT jacks

RIGHT (Red)

LEFT (White)

Audio amplifier AUX IN jack, etc.

Pin plug

PX160-ES-1A.indd 8 2015/01/06 10:39:12

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio PX-160 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio PX-160

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info