Bedienungsanleitung Casio PX-3 (Seite 45 von 70) (Englisch)

466891

Zoom out

Zoom in

Vorherige Seite

1/70

Nächste Seite

English

Playing Back a MIDI File

E-43

To practice with either hand (Part Off)

NOTE

•To perform the procedure below, use a MIDI file that

has the left-hand part recorded in Channel 3 and the

right-hand part recorded in Channel 4.

Enter the CARD PLAYER mode and select

the MIDI file you want to play.

Press the  (PART) button.

•This will display the part on/off screen (L-[ON]

R-[ON]) to appear on the display.

Use the  (w, q) buttons to toggle the

parts on and off.

•w toggles the left-hand part and q toggles the

right-hand part.

Press the  (PART) button to exit the part

on/off screen.

To start playback, press the  (PLAY/STOP)

button.

•This starts playback of the part you turned on in

step 2. You can play the part you turned off on the

keyboard along with the playback.

To repeat play a specific section of a

song

Press the  (PLAY/STOP) button to start

song playback.

When playback reaches the first beat of the

section you want to select for repeat, press

the  (REPEAT) button.

•This will cause the  (REPEAT) button lamp to

flash.

When playback reaches the last beat of the

section, press the  (REPEAT) button again.

•The  (REPEAT) button lamp will remain lit, which

indicates that repeat playback is being performed.

After a one-measure (four beats in the cast of a 4/4

time song) rest, the Digital Piano will start playing

the section you selected. Playback of the selected

section continues, with a one-measure rest before

each playback.

•You can use the  (PLAY/STOP) button to stop and

re-start playback of the section.

To exit repeat playback, press the 

(REPEAT) button again so its lamp goes out.

•Using the  (w, q) buttons to switch to another

song also will exit repeat playback.

To play on the keyboard along with

playback

In the MASTER CONTROL mode, select the

tones you want to use for each zone you will

play on the keyboard.

•See “Selecting a Tone” (page E-11) and “Layering and

Splitting Tones” (page E-12).

Enter the CARD PLAYER mode and start

MIDI file playback.

•See “MIDI File Playback Operations” (page E-41).

Play on the keyboard along with playback.

NOTE

•The parts used for MIDI file playback (Song01

through Song16) are independent of the parts used

for Digital Piano keyboard play (Upper1, Upper2,

Lower1, Lower2). For more information, see “Sound

Source Configuration” (page E-5). This means that

playing on the keyboard does not interfere with

proper MIDI file playback.

•You can select the tones for each zone you will play

on the keyboard after entering the CARD PLAYER

mode. For more information, see “To select a tone

for each zone in the CARD PLAYER mode” (page

E-44).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio PX-3 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio PX-3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info