Bedienungsanleitung Casio PX-3 (Seite 54 von 70) (Englisch)

466891

Zoom out

Zoom in

Vorherige Seite

1/70

Nächste Seite

E-52

Reference

Troubleshooting

Problem Cause Action See Page

Nothing comes out of the

connected headphones or

amplifier speakers when I play

something.

The  (VOLUME) knob is set to

“MIN”.

Rotate the  (VOLUME) knob more

towards “MAX”.

 E-11

The UPPER 1 zone setting is INT

OFF.

Change the UPPER 1 zone setting to INT

ON. If you are using Layer and/or Split,

change the setting of the zone you are

using to INT ON.

 E-27

The pitch of the Digital Piano

is off.

The Digital Piano’s key setting is

something other than 0.

Change the key setting to 0, or turn Digital

Piano power off and then back on again.

 E-20

Digital Piano tuning is incorrect. Adjust Digital Piano tuning, or turn Digital

Piano power off and then back on again.

 E-39

The Coarse Tuning and/or Fine

Tuning setting is something other

than 0.

Change the setting(s) to 0 or turn Digital

Piano power off and then back on.

 E-31

A non-standard temperament setting

is being used.

Change the temperament setting to

“00:Equal”, which is the standard modern

tuning.

 E-39

Octave shift is enabled. Change the octave shift setting to 0.  E-30

Tones and/or effects sound

strange. Turning power off

and then back on again does

not eliminate the problem.

Example:

Note intensity does

not change even though I alter

key pressure.

The “Backup” feature is turned on. Turn off “Backup”. Next, turn power off

and then back on again.

 E-40

I cannot hear any chorus/

reverb effect when I turn on

chorus/reverb.

The chorus send/reverb send setting

is 0.

Change the chorus send/reverb send

setting to a greater value.

 E-32

I cannot play back a music file

from an SD card.

The file you are trying to play is not a

format supported by this Digital

Piano.

This Digital Piano supports playback of

Format0 or Format1 SMF files, or CM2

(CASIO proprietary format) files only.

Playback of WAV and MP3 files, or other

format MIDI files is not supported.

 E-41

I cannot transfer data after

connecting the Digital Piano

to a computer.

— • Check to make sure that the USB cable

is connected to the Digital Piano and

computer, and that the correct device is

selected with your computer’s music

software.

 E-49

• Turn off the Digital Piano and then exit

the music software on your computer.

Next, turn the Digital Piano back on and

then restart the music software on your

computer.

I cannot store data to a

memory card or load data

from a memory card.

— See “Error Messages” on page E-48. —

Playback stops part way

through while transferring

song data from my computer.

Digital noise from the USB cable or

power cord caused data

communication between your

computer and Digital Piano to be

interrupted.

Stop song playback, disconnect the USB

cable from the Digital Piano, and then

reconnect it. Next, try playing back the

song again.

If this does not solve the problem, quit the

MIDI software you are using, disconnect

the USB cable from the Digital Piano, and

then reconnect it. Next, restart the MIDI

software and then try playing back the

song again.

 E-49

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio PX-3 Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio PX-3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info