Bedienungsanleitung Casio PX-330 (Seite 24 von 72) (Englisch)

586830

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

E-22

Using Auto Accompaniment

Use the instrument part buttons (

through

) to select the part (drums, bass etc.) you

want to edit.

The name of the part you select will appear on the

display. Rhythm patterns are made up of the eight parts

shown below.

• Button illumination does not change when you press

the instrument part buttons (

through

). Button

illumination indicates whether there is

accompaniment data corresponding to each part.

Example: When bass is selected

Edit the selected part as desired.

The table below describes the parameters you can edit.

• Use the

(u) and

(i) buttons to select a

parameter, and the

(w, q) buttons to change its

setting. You also can use shortcut buttons (see table

below) to select parameters.

• Pressing the

(w, q) buttons at the same time

will return the currently selected parameter to its

initial default setting.

• Pressing the

(START/STOP) button during an

edit operation will sound the accompaniment pattern

with the edits you have made up to that point.

Pressing the

(ACCOMP ON/OFF) button will

sound only the instrument part you are editing.

Procedure continues on page E-23.

ck cl cm cn co cp cq cr

Drums Percus-

sion

Bass Chord 1 Chord 2 Chord 3 Chord 4 Chord 5

Parts

Instrument part name

Parameter Description Setting

Shortcut

Button

Rhythm

Select:

Rhythm

Replaces the part

(drum, bass, etc.)

accompaniment

data with that of

the specified

rhythm number.

001 to 190:

Rhythm

number

*2 *3

Tone

Select:

Tone

Switches the part

tone (instrument)

to that of the

specified tone

number.

001 to 250: Tone

Numbers

*2 *4

Prt:

Part on/

off

Toggles each part

on or off.

OFF:

Mutes the part.

ON:

Sounds the

part.

Vol:

Volume

level

Controls the

volume level of

each part.

000 to 127

Pan:

Panning

(position)

Controls whether

the sound of the

part can be heard

from the left side or

right side.

–64 to 0 to 63

Reverb:

Reverb

Controls the level

of the reverb effect

(page E-13) applied

to the part notes.

000 to 127

Chorus:

Chorus

Controls the level

of the chorus effect

(page E-13) applied

to the part notes.

000 to 127

*1 Replacing part accompaniment data clears all edits to the

currently selected accompaniment data made up to that

point.

*2 Sequential numbers starting from 001, which is the first

rhythm of the first group (POPS/JAZZ). See the “Tone

List” (page A-1) and “Rhythm List” (page A-4) for

information on the numbering system.

*3 In the case of the intro and ending, specifying a rhythm

for one part (drum, bass, etc.) will cause the same rhythm

to be specified automatically for all of the other parts of

the pattern.

*4 Only drum set sounds (tone numbers 237 through 250)

can be selected for drum parts and percussion parts.

Drum set sounds cannot be selected for the bass and the

chord 1 through chord 5 parts.

*5 A smaller value shifts leftward, while a larger value shifts

rightward. A value of zero specifies center.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio PX-330 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio PX-330

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info