Bedienungsanleitung Casio PX-330 (Seite 32 von 72) (Englisch)

586830

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

E-30

Music Presets

Use the

(REW) and

(FF) buttons to

move the cursor (2) on the chord progression

editing screen to the step you want to select.

Change the content of the selected step as

desired.

Repeat the above steps to edit all of the steps

you want.

• You can playback the Music Preset you are currently

editing by pressing the

(START/STOP) button.

• The table below describes other Music Preset editing

operations you can perform. Press the

(FUNCTION) button, use the

(u) and

(i)

buttons to select the editing operation you want,

perform the required operation, and then press the

(ENTER) button to apply the edit and return to the

chord progression editing screen.

• To exit the editing operation and discard all of your

edits, press the

(EXIT) button.

* The Music Presets in groups B, C, and D are

numbered sequentially, following the numbers in

group A, which start with 001. For details about

sequential numbers, see the “Music Preset List” on

page A-6.

After all editing operations are complete,

press the

(EXIT) button to return to the

editing operation selection screen (page

E-28).

NOTE

• A single preset can contain up to approximately

2,000 chords. If your edits cause the chord limit to be

exceeded, the message “Memory Full” will appear

on the display and further editing will become

impossible.

3-1.Select a chord fingering mode and use the

chord keyboard (page E-19) to input chords.

Fingering a chord causes the cursor (2) to

move to the next step automatically.

• If you want to advance to the next step

without changing the current chord, press

the

(PAUSE) button.

• If (3) Resolution is shorter than the time up

to the next step, a new step (without chord)

that is equal to the time of the resolution

will be inserted temporarily into the Music

Preset. Fingering a chord for the new step

will cause the step to be registered as part

of the Music Preset, and the cursor will

advance to the next step.* You can use this

operation to insert a new step between the

current and following step.

* Using the

(REW) and

(FF) buttons to

move the cursor without inputting a chord

will delete the temporarily inserted step.

3-2.Use the

(w, q) buttons to change the

step timing (measure:beat:tick).

Each press of either button changing the

timing in accordance with the resolution.

• The range of values you can specify for the

step timing is limited by the steps before

and after the current step.

• The timing of the first step (001:1:00) is

fixed and cannot be changed. Also, the final

step is always one measure, regardless of

the resolution.

3-3.To delete a step, press both of the

(w and

q) buttons at the same time.

• You cannot delete the first step or the last

step.

Last step

Editing

Operation

(Display)

Description Operation

Initialize

(Initialize)

Initializes all steps.

Initialization is useful

when you want to create

a totally new chord

progression from

scratch.

–

Change Key

(Change

Key)

Changes the pitch (key)

of the chords in all of the

steps in semitone units.

Use the

(w, q)

buttons to select the

amount of change

you want (–5 to 6

semitones).

Append

Music Preset

(Append

Chords)

Copies all of the steps of

another Music Preset to

the end of the current

Music Preset.

Use the

(w, q)

buttons to select the

number

∗

of the

Music Preset you

want to add.

Delete

Measures

(DELETE

Measure)

Deletes a specified

number of measures

from the current cursor

step forward.

Use the

(w, q)

buttons to select the

measures.

Insert

Measure

(INSERT

1Measure)

Inserts a blank measure

at the currently selected

step.

–

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio PX-330 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio PX-330

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info