Bedienungsanleitung Casio PX-400R (Seite 11 von 49) (Englisch)

466887

Zoom out

Zoom in

Vorherige Seite

1/49

Nächste Seite

E-9

Selecting and Using Built-in Tones

419A-E-011B

Using the PITCH BEND Wheel

Rotating the PITCH BEND wheel causes the pitch of notes to bend.

This lets you add realistic effects to saxophone, electric guitar, and

other tones.

While playing a note on the keyboard, rotate the PITCH

BEND wheel on the left of the keyboard upwards or

downwards.

• Releasing the PITCH BEND wheel will cause the pitch to

return to its normal setting automatically.

Using the Metronome

Press the METRONOME button.

• This starts the metronome.

Rotate the dial to select the number of beats per

measure.

• Note that you need to select the number of beats per

measure with the dial within a few seconds after turning

on the metronome. If you don’t, the display will exit the

setting screen.

• You can select a value in the range of 2 through 6. With

each setting, a chime sounds as the first beat of each

measure, and the remaining beats sound as clicks.

Specifying 0 as the setting plays a straight click, without

any chime. This setting lets you practice with a steady beat.

Use the TEMPO buttons to adjust the tempo.

NOTE

• You can also use the dial to change the tempo setting while

the current setting is indicated by a value in brackets ([ ]) on

the display.

Example: [T:120]

• The value indicates the number of beats per minutes.

• To return the tempo to its initial default setting, press the

TEMPO and buttons at the same time.

To stop the metronome, press the METRONOME button

again.

Me t r o n ome 0 B e a t : 00000

[

]

00000000000000

Slower Faster

Using the Digital Piano’s Pedals

The digital piano is equipped with two pedal jacks, one for a

damper pedal and one for a soft/sostenuto pedal. You can use the

procedure below to specify the type of operation that should be

performed by the pedal connected to the PEDAL SOFT/

SOSTENUTO jack.

Pedal Types

● Damper Pedal

Pressing the pedal connected to the DAMPER jack while playing

notes causes the notes to sustain until you release the pedal.

● Soft Pedal

While the SOFT pedal is depressed, the volume of notes played

on the keyboard is reduced slightly, producing a softer sound.

Only notes that are played after the pedal is depressed are

affected, while previously played notes are not.

● Sostenuto Pedal

Like the DAMPER pedal, pressing the SOSTENUTO pedal causes

notes to continue to sustain until you release the pedal. The

difference is the timing when the effect is applied. With the

sostenuto pedal you play the notes and then depress the pedal

before releasing the keyboard keys. Only the notes whose

keyboard keys are depressed when the sostenuto pedal is pressed

are affected.

Selecting the PEDAL SOFT/SOSTENUTO

jack Pedal Function

The initial power on setting of the PEDAL SOFT/SOSTENUTO

jack is for soft pedal operation. See “Other Settings” on page E-26

for information about changing to sostenuto pedal operation.

SP-3

PX400R_e_01-16.p65 04.8.24, 4:34 PM9

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio PX-400R Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio PX-400R

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info