Bedienungsanleitung Casio PX-575R (Seite 28 von 100) (Englisch)

586832

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

E-26

Applying Effects to Tones

Selecting a DSP Type

In addition to the 100 built-in effect types, you can also edit

effect types to create your own and store them in user

memory. You can have up to 100 effect types in user memory

at one time. You can also select the DSP type of the last DSP

enabled tone that you used. This means you always have

access to the DSP type of Advanced Tones and tones you

download over the Internet. To select the DSP type of the last

DSP enabled tone that you used, select “Ton” in step 3 of the

procedure below.

Perform the following steps to select a DSP type.

PREPARATION

• When using a DSP effect, you should use the Mixer to

confirm that the DSP lines of the required parts are

turned on. See “Mixer Function” on page E-39 for more

information.

Press the EFFECT button so the EFFECT indicator

appears on the display.

Press the [왘] CURSOR button.

• The DSP type setting screen (step 3) will appear

automatically about fives seconds after you press the

button.

Use the [+] and [–] buttons or number buttons to

select the type of DSP you want.

• See the separate

Appendix

E for information about

the DSP types that are available.

• Here you could also change the parameters of the

effect you selected, if you want. See “Changing the

Settings of DSP Parameters” for more information.

NOTE

• The DSP type display area shows the DSP number (000

to 199), or “To n” (user tone created using DSP).

Changing the Settings of DSP

Parameters

You can control the relative strength of a DSP and how it is

applied. See the following section titled “DSP Parameters”

for more information.

After selecting the DSP type you want, use the [왗]

and [왘] CURSOR buttons to display the parameter

whose setting you want to change.

• This displays the parameter setting screen.

Use the [+] and [–] buttons or the number buttons

to make the parameter setting you want.

• Pressing the [+] and [–] buttons at the same time

returns the parameter to its recommended setting.

Press the EFFECT or EXIT button.

• This exits the tone or rhythm setting screen.

DSP Parameters

The following describes the parameters for each DSP.

DSP

■

Parameter 0 to 7

These parameters differ in accordance with the algorithm*

of the selected DSP type. For details, see the separate

Appendix

E, and the “algorithmlist_e.pdf” file in the

“English” folder on the CD-ROM that comes with your

digital piano.

* Effector structure and operation type

■

DSP Reverb Send (Range: 000 to 127)

Specifies how much of the post-DSP sound should be sent

to reverb.

■

DSP Chorus Send (Range: 000 to 127)

Specifies how much of the post-DSP sound should be sent

to chorus.

CURSOREFFECT

DSP EXIT

Number buttons

[+]

[–]

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio PX-575R Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info