Bedienungsanleitung Casio PX-575R (Seite 50 von 100) (Englisch)

586832

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

E-48

Synthesizer Mode

DSP Settings

Use the DSP editing screen to select the DSP type and to edit

parameters.

Select a tone, press the SYNTH button, and then

configure parameter settings.

After everything is the way you want, press the [왔]

CURSOR button once.

• This advances to the DSP parameter editing screen.

• Pressing the [왖] CURSOR button returns to the

Synthesizer Mode parameter screen.

This setting specifies DSP parameters. For details, see

“DSP Parameters” on page E-26, the separate

Appendix

and the “algorithmlist_e.pdf” file in the “English” folder on

the CD-ROM that comes with your digital piano.

NOTE

• If you store an original tone with the DSP line turned on

(page E-49), simply recalling the tone automatically

changes the DSP line, DSP type, and DSP parameter

settings. This simplifies the recall of original tones that

include a DSP effect.

User Tone Creation Hints

The following hints provide helpful advice on making user

tone creation a bit quicker and easier.

Use a preset tone that is similar to the one you are trying to

create.

Whenever you already have a rough idea of the tone you are

trying to create, it is always a good idea to start with a preset

tone that is similar.

■

Experiment with various different settings.

There are no real rules about what a tone should sound like.

Let your imagination run free and experiment with different

combinations. You may be surprised at what you can achieve.

Storing a User Tone In Memory

The following procedure shows how to store a user tone in

memory. Once a tone is stored, you can call it up just as you

do with a preset tone.

To name a user tone and store it in

memory

Select a preset tone to use as the basis for the user

tone, press the SYNTH button to enter the

Synthesizer Mode, and make the parameter settings

you want.

After making parameter settings to create the user

tone, press [왔] CURSOR button twice.

Use [+] and [–] buttons or the number buttons to

change the user area tone number on the display

until the one where you want to store the tone is

shown.

• You can select any tone number from 700 to 799.

After the tone name is the way you want, press the

[왘] CURSOR button to store the tone.

• Use the [+] and [–] buttons to scroll through letters at

the current cursor location.

• Use the [왗] and [왘] CURSOR buttons to move the

cursor left and right.

• See the page E-87 for information about inputting text.

Press [왔] CURSOR button to save the user tone.

• This will display a confirmation message asking

whether you really want to save the data. Press the

YES button to save the data.

• The message “Complete” appears momentarily on the

display, followed by the tone or rhythm selection

screen.

• To abort the save operation at any time, press the

SYNTH button or the EXIT button to exit the

Synthesizer Mode. Pressing the SYNTH button again

(before selecting another tone) returns to the

Synthesizer Mode with all of your parameter settings

still in place.

701

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio PX-575R Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info