Bedienungsanleitung Casio PX-830 (Seite 40 von 47) (Englisch)

466871

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

E-38

Getting Ready

NOTE

• Be sure to push the headphones plug into the

PHONES jacks as far as it will go. If you don’t, you

may hear sound from only one side of the

headphones.

• If the plug of the headphones you are using does not

match the PHONES jacks, use the applicable

commercially available adaptor plug.

• If you are using headphones that require an adaptor

plug, make sure you do not leave the adaptor

plugged in when you unplug the headphones. If you

do, nothing will sound from the speakers when you

play.

You can connect audio equipment or a music amplifier

to the Digital Piano and then play through external

speakers for more powerful volume and better sound

quality.

IMPORTANT!

• The Digital Piano automatically adjusts sound output

to optimize for headphone output (when headphones

are connected) or built-in speaker output (when

headphones are not connected). This also will cause

a change in the output quality from the Digital

Piano’s LINE OUT R and L/MONO jacks.

• Whenever connecting a device to the Digital Piano,

first use the VOLUME controller to set the volume to

a low level. After connecting, you can adjust the

volume to the level you want.

• Whenever you connect any device to the Digital

Piano, be sure to read the user documentation that

comes with the device.

Connecting to Audio Equipment

Use commercially available cables to connect the

external audio equipment to the piano’s LINE OUT

jacks as shown in Figure

. LINE OUT R jack output

is right channel sound, while LINE OUT L/MONO

jack output is left channel sound. It is up to you to

purchase connecting cables like the ones shown in the

illustration for connection of audio equipment.

Normally in this configuration you must set the audio

equipment’s input selector to the setting that specifies

the terminal (such as AUX IN) to which the piano is

connected. Use the piano’s VOLUME controller to

adjust the volume level.

Connecting to a Musical Instrument

Amplifier

Use commercially available cables to connect the

amplifier to the piano’s LINE OUT jacks as shown in

Figure

. LINE OUT R jack output is right channel

sound, while LINE OUT L/MONO jack output is left

channel sound. Connecting to the LINE OUT

L/ MONO jack only outputs a mixture of both

channels. It is up to you to purchase connecting cable

like the one shown in the illustration for connection of

the amplifier. Use the piano’s VOLUME controller to

adjust the volume level.

Use only accessories that are specified for use with this

Digital Piano.

Use of unauthorized accessories creates the risk of fire,

electric shock, and personal injury.

NOTE

• You can get information about accessories that are

sold separately for this product from the CASIO

catalog available from your retailer, and from the

CASIO website at the following URL.

http://world.casio.com/

Connecting Audio Equipment

or an Amplifier

INPUT 1

INPUT 2

Guitar amplifier

Keyboard amplifier, etc.

Standard plug

Standard jack

LEFT (White)

RIGHT (Red)

Audio amplifier AUX IN jack, etc.

Pin plug

Bundled and Optional

Accessories

PX830_03_e.fm 38 ページ２００９年７月１６日　木曜日　午後１２時３９分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio PX-830 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio PX-830

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info