Bedienungsanleitung Casio PX-S1100 (Seite 8 von 61) (Englisch)

781705

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

EN-7

Overview and Setup

■Power On Alert

After about six minutes of non-operation while the Digital

Piano is being powered by its AC adaptor, the Power On Alert

function will cause touch button lights to turn on and off

sequentially to remind you that power is on. Button lights will

return to normal (all button lights lit) if you touch a button, play

something on the keyboard, or perform some other operation.

To turn off power, hold down the 1P (Power) button until all

lit touch button lights turn off.

• You can enable or disable the power on reminder as

required. See “Other Settings” (page EN-45).

• If you are using batteries to power the Digital Piano, power

will turn off automatically after about six minutes of non-

use. See “Auto Power Off” (page EN-7).

■Returning to Initial Factory Defaults

You can use Factory Reset (Initialization) to return the Digital

Piano’s stored data and settings to their initial factory defaults

any time you want. For more information, see “Factory Reset

(Initialization)” (page EN-47).

This Digital Piano is designed to turn off automatically to avoid

wasting power after no operation is performed for a preset

amount of time. The Auto Power Off trigger time is about four

hours when power is being supplied by the AC adaptor, or six

minutes under battery power.

• You can disable Auto Power Off to ensure that power does

not turn off automatically during a concert, etc. To disable

Auto Power Off, perform the procedure below.

■To enable or disable Auto Power Off

While holding down 3FUNCTION, press the

B}0 keyboard key.

• Each press of the B}0 keyboard key sounds a

notification tone and toggles Auto Power off between

enabled and disabled. For more information, see

“Notification Tones” (page EN-10).

After the setting is the way you want, release

3FUNCTION.

Connect the supplied pedal (SP-3) to the bm DAMPER

PEDAL jack.

Back

This pedal functions as a damper pedal under initial Digital

Piano default settings. To change it to a different function

(soft, sostenuto, etc.), see “Changing Pedal Functions” (page

EN-44).

■PEDAL UNIT Jack

You can connect the optionally available 3-Pedal Unit (SP-34)

to the bn PEDAL UNIT jack on the back of the Digital Piano.

You can then use the pedals for expression that is similar to

that available on an acoustic piano.

SP-34 Pedal Functions

●Damper Pedal

Pressing the damper pedal while playing will cause the notes

you play to reverberate. The SP-34 pedal also supports half-

pedal operation, so pressing the pedal part way applies only a

partial damper effect.

●Soft Pedal

Pressing this pedal suppresses notes played on the keyboard

after the pedal was pressed, and makes them sound softer.

●Sostenuto Pedal

Only the notes of the keys that are depressed when this pedal

is pressed are sustained, even if the keyboard keys are

released, until the pedal is released.

• A separately available pedal unit can be used at the same

time as the supplied pedal.

Auto Power Off

B}0

C1A0 C2 C3 C4 C5 C6 C7 C8

Using a Pedal

bm DAMPER PEDAL jack (Standard jack (6.3mm))

SP-3

Soft Pedal

Sostenuto Pedal

Damper Pedal

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio PX-S1100 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio PX-S1100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info