Bedienungsanleitung Casio PX-S1100 (Seite 30 von 61) (Englisch)

781705

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

EN-29

Digital Piano Operations

■To record the left-hand part track

Depending on the track to be recorded,

configure the applicable settings.

•See “Recorded MIDI Data” (page EN-27).

• If you want to specify a beat and tempo setting, refer to

the information below and configure the settings.

“To change the metronome beat” (page EN-21)

“Specifying the Tempo” (page EN-22)

While the 70 (REC) button is lit white, touch

70 (REC).

This enters record standby, which is indicated by flashing

70 (REC) (red) and 6a (white) lights.

• At this time, the “L” indicator starts to flash. This

indicates that the left-hand part track will be recorded.

• To exit a recording operation here, touch 70 (REC).

This makes 70 (REC) light white again.

If you want the metronome to sound during

recording, touch 5METRONOME.

To start recording, play something on the

keyboard, press the pedal or touch 6a.

This causes the 70 (REC) light (red) to change from

flashing to lit.

When you are finished recording, touch 70

(REC) or 6a.

This makes 70 (REC) light white again.

To replay the recording, touch 6a.

Restarting Recording From the Beginning

• If you make a mistake and want to stop an ongoing

recording operation and restart recording from the

beginning, hold down 70 (REC) until its light flashes.

This discards everything you have recorded to the left-hand

track and returns to record standby. Perform the operation

from step 4 of the above procedure to restart recording.

■To overdub a left-hand part track recording with

right-hand part track recording

Perform steps 1 and 2 under “To record the

left-hand part track” (page EN-29).

Press 70 (REC) as many times as necessary

until the “R” and “L” indicators are as

described below.

• “R” indicator flashing. This indicates that the right-hand

part track will be recorded.

• The “L” indicator stops flashing. This indicates that the

left-hand part track recording is complete.

As required, specify whether or not you want

to play back the left-hand track while

recording.

(1) While holding down 6a, press keyboard key A0

(leftmost white key).

Each press of the A0 keyboard key toggles the “L”

indicator between lit and unlit.

L lit: Left-hand part track playback during recording.

L unlit: No left-hand part track playback during

recording.

(2) Release 6a.

If you want the metronome to sound during

recording, touch 5METRONOME.

To start recording, play something on the

keyboard, press the pedal or touch 6a.

This causes the 70 (REC) light (red) to change from

flashing to lit.

• The settings configured for the left-hand part track are

applied for the beat and tempo.

Perform the procedure starting from step 5

under “To record the left-hand part track”

(page EN-29).

Restarting Overdubbing From the Beginning

• If you make a mistake and want to stop an ongoing

overdubbing operation and restart overdubbing from the

beginning, hold down 70 (REC) until its light flashes.

This discards everything you have recorded to the right-

hand track and returns to record standby. Perform the

operation from step 5 of the above procedure to restart

overdubbing.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio PX-S1100 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio PX-S1100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info