Bedienungsanleitung Casio PX-S3100 (Seite 18 von 96) (Englisch)

781706

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

EN-17

Digital Piano Operations

■To unsplit the keyboard

Use the bp^ button to cycle through settings

until the “^CTRL” indicator to the right of the

button is lit.

Touch ck SPLIT so the “SP” indicator

disappears from the display.

You can individually configure volume level, octave shift, and

tuning settings for the Upper1, Upper2, and Lower parts. You

can also specify whether or not pedal and/or cn PITCH

BEND wheel operations should affect each part.

■To change the volume level, octave shift, and

tuning settings of each part

Use FUNCTION parameters 14 (PART VOLUME), 18 (PART

OCT SHIFT), and 22 (PART FINE TUNE) to configure each

setting. For information about FUNCTION parameters, see

“Configuring Function Settings (FUNCTION Mode)” (page

EN-53).

■To enable or disable pedal operations and pitch

bend wheel operations for each part

Use FUNCTION parameters 36 (DAMPER PEDAL), 41 (EXP/

ASGN PEDAL), 48 (PEDAL UNIT), and 52 (WHEEL) to

configure each setting. For information about FUNCTION

parameters, see “Configuring Function Settings (FUNCTION

Mode)” (page EN-53).

*1 The On/Off setting selected here is applied only while the

“Sustain”, “Sostenuto”, or “Soft” setting in the table under

“To change the function of the pedal connected to the

DAMPER PEDAL jack” (page EN-7) is selected. In all

other cases, the effect (or function) assigned to the pedal

is applied, regardless of what is selected here.

*2 The On/Off setting selected here is applied only while the

“Expression”, “Sustain”, “Sostenuto”, or “Soft” setting in the

table under “To specify the pedal type” (page EN-9) is

selected. In all other cases, the effect (or function)

assigned to the pedal is applied, regardless of what is

selected here.

Configuring Layer and Split Settings

Parameter Name

(Displayed)

Use this

setting

(displayed):

To do this:

PART VOLUME

3Upper1 Part,

Upper2 Part,

Lower Part

0 - 127 Adjust the volume

level of each part.

PART OCT SHIFT

3Upper1 Part,

Upper2 Part,

Lower Part

–2 - +2 Specify the octave

shift amount of each

part.

PART FINE TUNE

3Upper1 Part,

Upper2 Part,

Lower Part

–99 - +99 Specify, in 1-cent

steps, the pitch of

each part.

Parameter Name

(Displayed)

Use this

setting

(displayed):

To do this:

PEDAL UNIT

3Upper1 Part,

Upper2 Part,

Lower Part

On, Off Specify whether or not

the three pedals

connected to the

cs PEDAL UNIT

jack should be applied

to each part.

DAMPER PEDAL

3Upper1 Part,

Upper2 Part,

Lower Part

On, Off Specify whether or not

the pedal connected

to the cr DAMPER

PEDAL jack should

be applied to each

part.*1

EXP/ASGN PEDAL

3Upper1 Part,

Upper2 Part,

Lower Part

On, Off Specify whether or not

the pedal connected

to the

dl EXPRESSION/

ASSIGNABLE jack

should be applied to

each part.*2

WHEEL

3Upper1 Part,

Upper2 Part,

Lower Part

On, Off Specify whether or not

the cn PITCH BEND

wheel effect should be

applied to each part.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio PX-S3100 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio PX-S3100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info