Bedienungsanleitung Casio PX-S3100 (Seite 29 von 96) (Englisch)

781706

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Digital Piano Operations

EN-28

To disable the arpeggiator, touch bt ARPEG.

This will cause “AR” to disappear from the

display.

• Enabling FUNCTION parameter 80 (“Arpeggio Hold”)

causes the arpeggio pattern to continue playing even after

you release the keyboard keys of the chord.

• You can use FUNCTION parameter 81 (“Arpeggio Part”) to

specify whether the arpeggiator sounds for both the Upper1

and Upper2 parts when the keyboard is layered with two

tones (page EN-15), or for the Upper1 part only.

• For information about FUNCTION parameters, see

“Configuring Function Settings (FUNCTION Mode)” (page

EN-53).

■To select an arpeggiator type

Perform steps 1 and 2 of the procedure under

“To enable the arpeggiator” (page EN-27) to

enable the arpeggiator.

Hold down the bt ARPEG. button until

“ARPEG.” appears on the display.

This causes the currently selected arpeggiator type to

appear in line two of the display.

Use the bk – and bl + buttons to select an

arpeggiator type.

• While the arpeggiator type is displayed, holding down

the bt ARPEG. button until the tone name display

appears will select the tone that is recommended for

the displayed arpeggiator type.

• For details about arpeggiator types, refer to the

separate “Built-in Music Data Lists”.

You can split the keyboard in the center for duet play so the

left and right sides have the same ranges. The Duet Mode is

the perfect way to conduct lessons, with the teacher playing

on the left side as the student plays the same song on the

right side.

• You can change the ranges of the left and right keyboards

in octave units from their initial default settings. This comes

in handy, for example, if the initial default range is not

enough when one person is playing the left hand part and

another person is playing the right hand part. For

information about the setting operation, see “To change the

octaves of the duet keyboards” (page EN-29).

■Pedal Operation when Playing a Duet

• If you are using the separately available SP-34 Pedal Unit,

the left outer pedal is the left keyboard damper pedal, while

the right outer pedal is the right keyboard damper pedal.

Only the damper pedal for the right keyboard supports half-

pedal operations.

• To use the supplied SP-3 Pedal as a damper pedal that

affects both the left keyboard and right keyboard, connect it

to the cr DAMPER PEDAL jack. In the Duet Mode, this

pedal functions as a damper pedal, regardless of the effect

type assigned to it with the procedure under “To change the

function of the pedal connected to the DAMPER PEDAL

jack” (page EN-7). Half-pedal operation is not supported in

this case.

• If you connect the supplied SP-3 pedal to the

dl EXPRESSION/ASSIGNABLE jack, it can be used as

a soft pedal for both the left and right keyboards.

[

CTRL

]

ARPEG.

T : 120 AR

001 :Sc rew U

Splitting the Keyboard for Duet

Play

C3 C4 C5 C6 C3 C4 C5

Split point

Left keyboard Right keyboard

(middle C) (middle C)

Left side damper pedal

Left and right side

damper pedal

Right side damper pedal

(Half-pedal operation

supported)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio PX-S3100 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio PX-S3100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info