Bedienungsanleitung Casio PX-S3100 (Seite 39 von 96) (Englisch)

781706

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Digital Piano Operations

EN-38

There are two ways to change the tempo (beats per minute)

setting: using buttons to specify a tempo value, and tapping a

beat with a keyboard key or a pedal.

• You can specify use of a letter (T) or an icon (2) as the

display indicator to the left of the tempo value. To specify

the indicator type, use FUNCTION parameter 113 (“Tempo

Indicator”). For information about FUNCTION parameters,

see “Configuring Function Settings (FUNCTION Mode)”

(page EN-53).

■To specify a tempo value

Touch bm TEMPO.

The current tempo value will be shown on the display.

Use the bk – and bl + buttons to adjust the

tempo value.

• You can specify a tempo value in the range of 20 to

255.

• To return the currently selected song, rhythm pattern,

or music preset to its recommended tempo setting,

touch bk – and bl + at the same time.

To exit the setting screen, touch bm TEMPO or

bp EXIT.

■To use the keyboard key or a pedal to adjust the

tempo

Hold down the bm TEMPO button.

This causes “TAP” to appear to the right of [TEMPO] on

the display.

Press a keyboard key or a pedal at least twice

in succession.

• This will set a tempo that corresponds to the speed at

which you pressed the keyboard key or pedal.

Release bm TEMPO.

• You can use the above steps to set an approximate

tempo and then use the steps under “To specify a

tempo value” to fine tune the setting.

• Note that an expression pedal cannot be used to set a

tempo using the above procedure.

Selecting a Music Preset instantly changes the Digital Piano

to a preset setup (tone, rhythm, chord progression, etc.) for

play of songs of various genres/categories. The press of a

button sets up the Digital Piano so those songs sound exactly

the way you thought they should. See the separate “Built-in

Music Data Lists” for a complete list of the 310 Music Presets

that are available.

■To perform using a music preset

Use the 3 mode selector button to cycle

through setting until the “RHYTHM” or

“ACCOMP” indicator is lit.

Use the bp^ button to cycle through settings

until the “^RHYTHM” indicator to the right of

the button is lit.

Hold down the bq POPS button until “[MUSIC

PRESET]” appears on the display.

This enters the Music Preset Mode and causes the 3

mode selector button “ACCOMP” indicator to flash.

• The name and number of the currently selected music

preset will be shown on the display.

• This enters synchro start standby, which is indicated

by the flashing yellow and red LEDs above the

8START/STOP button.

Changing the Auto

Accompaniment and Song Tempo

[

]

T : 120

120

Using Music Preset

[

US I C PRESET

]

T : 124

001 :So f t Po

Music preset number Music preset name

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio PX-S3100 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio PX-S3100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info