Bedienungsanleitung Casio PX-S3100 (Seite 47 von 96) (Englisch)

781706

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Digital Piano Operations

EN-46

■To select a track number before recording

Use the 3 mode selector button to cycle

through settings until the “SONG” (SONG

Mode) indicator is lit.

Use the bk – and bl + buttons to select a song

number.

• Song numbers 11 through 15 are MIDI recorder areas.

If necessary, you can touch 8a to check whether

or not the selected area already has something

recorded to it.

• To record to the song number you select here, perform

the procedure under “To record to the system track”

(page EN-45). If the system track of the selected song

number already has recorded data, it will be

overwritten by the new recording.

■To overdub record a solo track over a recorded

system track

• If you are performing the procedure below immediately

following the procedure under “To record to the system

track” (page EN-45), you do not need to enter the SONG

Mode or select a song. Therefore, you should skip steps 1

and 2 below.

Use the 3 mode selector button to cycle

through settings until the “SONG” (SONG

Mode) indicator is lit.

Use the bk – and bl + buttons to select the

song number of a MIDI recorder song that was

recorded to the system track.

• Song numbers 11 through 15 are for songs recorded

with the MIDI recorder. If necessary, you can touch

8a to play back the song and check its contents.

Configure tone and other settings you want to

use for recording.

• For setting items that can be recorded at the beginning

of a recording, see the “Solo” column in the table

under “Recorded Data for Each Track” (page EN-44).

Touch bo REC0.

This enters record standby, indicated by bo REC0

flashing red.

Hold down the bo REC0 button until “[MIDI

REC SETTING]” appears on the display.

After confirming that “Rec Track” is displayed,

touch bm ENTER.

Use the bk – and bl + buttons to select a

track.

• The display will show “Solo 1” or “Solo 2” depending

on the solo track you select.

To start recording, play something on the

keyboard or touch 8START/STOP.*

This simultaneously starts playback of the system track

and recording to the solo track you selected in step 7

above.

This causes bo REC0 to stop flashing and remain lit

red, which indicates that recording is in progress.

*Recording can also be started using other operations.

For details, see “Operations that Start Recording”

(page EN-45).

To stop recording, touch bo REC0.

10.

To play back the song you just recorded, touch

8a.

• This will play back the contents of both the system

track and the solo track.

• If you want to overdub record the other solo track,

perform steps 3 through 10 again, selecting the

remaining (unrecorded) solo track in step 7.

[

IDI REC SETTING

]

–

Sys t e

Rec Tr ack

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio PX-S3100 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio PX-S3100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info