Bedienungsanleitung Casio QV-10B (Seite 15 von 23) (Englisch)

497599

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

Playing Back Images

Using the Zoom Function

This function lets you select a specific part of a stored image and

enlarge it to twice its normal size.

1. Display an image.

2. Press the ZOOM button to zoom in on the center of the im-

age.

• The center of the image is enlarged to twice its normal size.

3. Change the position of the zoom area.

• You can use [+] and [–] to change the position of the zoom

area in the sequence shown on page 58.

4. Press the ZOOM button again to return the image to its

original size.

Operation

Changing the Location of the Zoom Area

• Pressing [–] moves the zoom area in the opposite direction.

Notes

• If the page number is displayed in the upper right corner of the

screen when you perform a zoom operation, the number is replaced

by a zoom area indicator. This indicator shows you what part of the

image is currently enlarged on the display. You can turn the zoom

area indicator on and off by pressing the DISP button.

• Note that turning display of the zoom area indicator on and off dur-

ing a zoom operation also affects the display of the image number

in the Record Mode (page 52), and the memory page number in the

Playback Mode (page 43).

Zoom area indicator

Playing Back Images

Using Auto Play

Auto play lets you automatically scroll through the camera’s memory

pages quickly and easily. You can specify the speed of the scroll, the

display format (1-page, 4-page, or 9-page), and the range of pages to

be included in the scroll operation.

Important!

• The camera’s Auto Power Off function (page 29) does not function

while an auto play operation is in progress. If you forget to turn the

camera off, there is the danger that auto play will continue until bat-

teries are dead. To avoid this, make sure that you stop the auto play

operation and turn the camera off when you finish viewing.

To start the auto play operation

1. Enter the Playback Mode and turn on the camera.

2. Start the auto play operation.

• Hold down the [+] and [–] buttons until the message “AUTO

PLAY START” appears.

• There must be at least two images (two pages) recorded in

memory to use the auto play operation. Otherwise, the

"AUTO PLAY START" message will not appear on the dis-

play.

• After about one second, this message disappears and the

auto play operation starts.

Operation

3 seconds

• Auto play continues to loop through the memory pages. This

means that when it reaches the last page, it starts again

from the first page.

3. Press the shutter button to stop the auto play operation.

• Pressing any button except the

MODE button stops the auto play

operation.

• Note that the buttons of the cam-

era do not operate while a page

change operation is in progress.

Make sure that an image is shown

on the display when you press a

button to stop the auto play opera-

tion.

Other Auto Play Features

When using auto play, you can specify the speed of the scroll, the

display format (1-page, 4-page, or 9-page), and the range of pages to

be included in the scroll operation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio QV-10B Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info