Bedienungsanleitung Casio qv 200 (Seite 10 von 19) (Englisch)

288820

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

Playing Back Images

4. Press the shutter button.

• At this time the image is doubled in size. The portion that

appears on the screen is the center of the image.

5. Scroll the image on the screen.

• Use [+] and [–] to scroll as shown in the illustration below.

6. To clear the zoomed display and return to the normal size

display, press any button besides [+], [–], or DISP.

Changing the Location of the Zoom Area

• Pressing [–] moves the zoom area in the opposite direction.

【＋】【＋】【＋】

Operation

Notes

• If the page number is displayed in the upper right corner of the

screen when you perform a zoom operation, the number is replaced

by a zoom area indicator (

). This indicator shows you what part

of the image is currently enlarged on the display. You can turn the

zoom area indicator on and off by pressing the DISP button.

• Note that turning display of the zoom area indicator on and off dur-

ing a zoom operation also affects the display of the image number

in the Record Mode (page 27), and the memory page number in the

Playback Mode (page 33).

Superimposing a Title on an Image

With this camera you can record a title and then superimpose the

title onto another image. Note that you have to prepare a paper

copy of your title before performing the following procedure.

To record the title

1. Enter the Record Mode.

• Slide the function switch to the REC position.

2. Press the EFFECT button.

• You can also use the [+] and [–]

buttons to adjust the exposure at

this point. See page 25 for infor-

mation about exposure adjust-

ment.

Playing Back Images

3. Align the camera’s frame with the title and then press the

shutter button.

• The message “WAIT” appears for

a few moments after you press

the shutter button to indicate that

the title is being recorded.

• You can use the [+] and [–]

buttons to adjust the brightness of

the title within a range of ±30.

4. Press the shutter button again to store the title using the

brightness setting you selected in step 3.

Note

The title can be inserted in the area defined by the outer line of the

frame.

To superimpose a title on an image

1. Enter the Playback Mode.

• Slide the Function switch to the PLAY position.

2. Use the [+] and [–] buttons to scroll through the images in

memory until the one you want to superimpose a title onto

is on the monitor screen.

3. Press EFFECT to display the EFFECT Menu.

• If you want to clear the EFFECT

Menu without proceeding any

further, press EFFECT again.

Operation

4. Use the [+] and [–] buttons to select the “TITLE” item.

5. Press the shutter button.

6. Use the [+] and [–] buttons to select the color of the title.

• Each press of [+] changes the selected color in the following

sequence: Black

Aqua Yellow Pink Blue

Green Red Orange Purple White White-on-

Black

White-on-Aqua ······and so on···Pressing [–]

changes colors in reverse sequence.

7. Press the shutter button to register the selected color.

8. Use the [+] and [–] buttons to select a frame for the title.

• Each press of [+] changes the selected frame in the follow-

ing sequence: PLATE1

PLATE2 PLATE3 PLATE4

No Frame. Pressing [–] changes frames in reverse se-

quence.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio qv 200 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info