Bedienungsanleitung Casio qv 300 (Seite 4 von 17) (Englisch)

288826

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

The camera features a two-way power supply that lets you use either

batteries (AA-size Alkaline or Lithium) or household AC current.

To load batteries

Be sure that camera power is turned off whenever loading or replac-

ing batteries.

1. Slide the battery compartment

lock on the bottom of the camera

in the direction indicated by arrow

1, and swing open the battery

compartment cover as indicated

by arrow

2. Insert four batteries and close the

battery compartment cover.

Power Supply

Be sure to use Alkaline or Lithium batteries. Never use

manganese batteries (see precautions on the next page).

• Make sure that the positive + and negative - ends of the

batteries are facing correctly.

• Press down on the battery compartment cover at the point

marked A in the above illustration until the cover locks into

place with a click.

Getting Acquainted

Battery Handling Precautions

Incorrect use or handling of batteries can cause them to leak or burst

and seriously damage your camera. Be sure to note the following

important precautions to avoid problems with batteries.

• Use only LR6 (AM-3) type alkaline or

FR6 type lithium dry cell batteries

with this camera. Never mix old bat-

teries with new ones. Failure to do so

can result in bursting or leaking of

batteries, creating the danger of fire

or personal injury.

• Always make sure that the positive

[+] and negative [–] ends of the bat-

teries are facing correctly, as noted

by the markings on the camera itself.

Improper loading of batteries can re-

sult in bursting or leaking of batteries,

creating the danger of personal injury

or soiling of objects nearby.

Caution

• Remove batteries from the camera if you do not plan to use it for

more than two weeks.

• Never recharge batteries, never allow direct connection between

two ends of a battery, and never try to take batteries apart.

• Do not expose batteries to direct heat or dispose of them by burn-

ing. Doing so can create the danger of explosion.

• Never mix batteries of different types.

Power Supply

• Dead batteries are susceptible to leakage, which can cause serious

damage to your camera. Remove batteries from the camera as

soon as you notice they are dead.

• The batteries that power this camera normally become warm when

they lose power. This does not indicate malfunction.

Standard Battery Life

The battery life reference values given below indicate the amount of

time at standard temperature (25°C) until power automatically turns

off due to battery failure. They do not guarantee that batteries will

perform the amount of service indicated. Battery life is reduced by low

temperatures and continued use.

LR6 (AM3) AA-size alkaline batteries

Approximately 130 minutes continuous operation

Recording for about 96 images (one image per minute)

FR6 AA-size lithium batteries

Approximately 220 minutes continuous operation

Recording for about 180 images (one image per minute)

Low Battery Indicator

The low battery indicator ( ) appears in the center of the LCD

whenever remaining battery power drops below a certain level. It tells

you that power will soon turn off automatically if you continue using

the camera without replacing batteries. Be sure to replace all four

batteries with a fresh set of new ones.

Getting Acquainted

Flash Memory

The camera features flash memory for storage of images. Flash

memory does not require electrical power to store data, so image

data is retained in memory even when you turn camera power off. If

batteries go dead, simply load a set of new batteries or connect the

AC adaptor and you will be able to view images in camera memory.

Auto Power Off

Power automatically turns off whenever you do not perform any cam-

era operation for a period of time. Power turns off after about two

minutes in the Record Mode or after about five minutes in the Play-

back Mode.

• To restore power, simply slide the POWER switch to the right as

you normally do.

Important!

The Auto Power Off function does not operate under the following

conditions.

• During Auto Play (page 38)

• When operations are being performed on a computer connected to

the camera via the camera’s DIGITAL terminal.

• Whenever the AC adaptor is connected to the camera.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio qv 300 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info