Bedienungsanleitung Casio qv 5000sx (Seite 7 von 19) (Englisch)

288828

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

RECORDING

Macro Correction Frame

This frame shows the focus range when the distance from

the lens to the subject is 30 cm (11.8"). You can use the

viewfinder for distances from 30 cm (11.8") to infinity. When

using Auto Focus, compose the subject so it is within the

Auto Focus Frame.

Press

/ to enter the Macro Mode or use the Manual

Mode for distances less than 30 cm (11.8").

• Entering the Macro Mode automatically turns on the moni-

tor screen. Use the monitor screen to compose images in

the Macro Mode.

Using Focus Lock

Normally, Auto Focus automatically focuses on the object

that is inside the Auto Focus Frame. Focus lock is a tech-

nique that lets you lock the focus on a subject and then move

the camera so the Auto Focus Frame is pointed at another

subject when you record. This keeps the original subject in

focus, even though a different object is within the Auto Focus

Frame.

Align the Auto Focus

Frame with the subject

you want to lock on and

press the shutter button

half way down.

While keeping the shut-

ter button depressed

half way, move the cam-

era and compose the im-

age as you want.

Press the shutter button

all the way down to

record the image.

RECORDING

Using the Flash

You can use the built-in flash unit to provide illumination dur-

ing recording.

Press .

• Each press of cycles

through the flash mode in

the following sequence:

Auto

On Off Red-

eye Reduction.

Indicator

None

Flash Mode

Auto Flash

Flash On

Flash Off

Red-eye

Reduction

Description

Flash is automatically enabled and

disabled in accordance with expo-

sure conditions.

Flash is always fired, regardless of

exposure conditions.

Flash is never fired, regardless of

exposure conditions.

Fires a pre-flash followed by re-

cording with flash, which reduces

the chance of red-eye.

IMPORTANT!

• Never use the flash in areas where combustible or ex-

plosive gas is present. Doing so creates the danger of

fire and explosion.

• Never fire the flash in the direction of a person operat-

ing a motor vehicle. Doing so can interfere with the

driver’s vision and create the danger of accident.

• Never fire the flash while it is too close to the subject’s

eyes. Be especially careful with small children. In-

tense light from the flash can cause eye damage if it is

fired too close to the eyes, especially with young chil-

dren. When using the flash, the camera should be at

least one meter (40") from the eyes of the subject.

• Make sure that you do not touch or block the flash or

exposure sensor with your fingers. Doing so can soil

these components and interfere with correct flash op-

eration.

• The monitor screen goes blank and the operation indicator

flashes while the flash unit is charging.

Operation indicator

button

RECORDING

• Flash should be used for distances within the range of

about 0.7 meters to 2 meters (2.3' to 6.6'). Flash does

not work well outside this range.

• Depending on operating conditions (type of battery

being used, temperature, etc.), it may take up to 10

seconds for the flash unit to charge.

• The flash is disabled during movie recording. The

indicator flashes to indicate this condition.

• The flash unit will not charge when battery power is

low. The

indicator flashes red to warn you that the

flash will not fire correctly, which may affect exposure

of the image. Replace batteries as soon as possible

when this happens.

• Red-eye reduction may not work well when the cam-

era is not pointed directly at the subject or when the

subject is far from the camera.

• In the Red-eye Reduction Mode, the flash is fired au-

tomatically in accordance with exposure. Because of

this, the flash will not fire in a well-lit area.

• Use the flash in areas where available lighting is dim.

If you do not use a flash, shutter speed slows down

and creates the possibility of blurred images due to

camera movement. Mount the camera on a tripod if

you decide not to use the flash.

Resolution Settings

The camera has four resolution modes: Super Fine ( ), Fine

(

), Normal ( ), Economy ( ). The following shows the num-

ber of images that can be recorded in memory when all im-

ages are the same resolution. Use the procedure under

“Manual Recording” on page 34 for details on changing the

resolution modes.

The above figures are approximations only. The actual num-

ber of images depends on image subject matter.

Setting

Indicator

Resolution Number of Images

Super Fine

Fine

Normal

Economy

(450KB compressed)

(225KB compressed)

(113KB compressed)

(64KB compressed)

Computer

Output image

1280 x 960 pixels

640 x 480 pixels

RECORDING

Exposure Adjustment

This camera features an program AE function that automati-

cally changes shutter speed and aperture in accordance

with available light. In addition, you can also manually adjust

the exposure to compensate for backlighting, indirect indoor

lighting, dark backgrounds, and other special conditions.

To manually adjust the exposure

If the LCD is turned off, press the LCD button to turn it on.

Set the Function Switch to REC.

Use [+] and [–] to perform exposure compensa-

tion.

• Pressing [+] or [–] displays an EV indicator that shows

the current exposure compensation setting.

• Pressing [+] makes the image on the LCD brighter.

Use it to adjust for dim indoor lighting and backlight-

ing.

• Pressing [–] makes the image on the LCD darker. Use

it to adjust for bright sunlight.

• The EV indicator turns red whenever the compensa-

tion value is at its limit.

After adjusting the exposure, press the shutter

button to record the image.

Casio qv 5000sx Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info