Bedienungsanleitung Casio qv 5500sx (Seite 11 von 26) (Englisch)

288829

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

RECORDING

While keeping the shut-

ter button depressed

half way, move the cam-

era and compose the im-

age as you want.

Press the shutter button all the way down to

record the image.

Using Focus Lock

Normally, Auto Focus automatically focuses on the object

that is inside the Auto Focus Frame. Focus lock is a tech-

nique that lets you lock the focus on a subject and then move

the camera so the Auto Focus Frame is pointed at another

subject when you record. This keeps the original subject in

focus, even though a different object is within the Auto Focus

Frame.

• The Auto Focus Frame is shown on the monitor screen

only while the shutter button is being held half way down.

• Locking the focus also locks the exposure setting.

Align the Auto Focus

Frame with the subject

you want to lock on and

press the shutter button

half way down.

• The Auto Focus frame turns

green or white when the im-

age is in focus.

RECORDING

Using Quick Shutter

Pressing the shutter button sequentially records images at

0.5-second intervals (when flash is turned off). You can use

quick shutter for recording up to six normal images or five

Night Scene Mode images.

IMPORTANT!

• Note that you can use the viewfinder only (monitor

screen turned off) when recording images at a 0.5-

second interval. The interval is about one second

when the monitor screen is turned on.

• The power/card access lamp flashes while data is be-

ing written to the memory card. Never remove the

memory card from the camera while this lamp is flash-

ing.

• Do not perform an image record operation while the

low battery indicator “

” is displayed. Doing so may

result in failure of part of the image to be recorded.

• It takes about 60 seconds for six images to be stored

in memory.

Slide the Function Switch to REC.

On the Record menu (page 59), select “Record

Options 1” and then turn on “Quick Shutter”.

• Turning on “Quick Shutter” causes “ćććććć” to ap-

pear under the image folder name.

Press the shutter button.

•The ć marks sequentially change to b marks as im-

ages are recorded.

• Initially, images you record using quick shutter are

stored in a buffer. Any of the following conditions

causes images to be transferred from the buffer to the

memory card .

– Sliding the function switch to PLAY

– Pressing MODE or MENU

– When camera memory becomes full

– When the buffer becomes full (six images)

RECORDING

• The monitor screen goes blank and the operation lamp

flashes amber while the flash unit is charging.

Indicator

None

Flash Mode

Auto Flash

Flash On

Flash Off

Red-eye

Reduction

Description

Flash is automatically enabled and

disabled in accordance with expo-

sure conditions.

Flash is always fired, regardless of

exposure conditions.

Flash is never fired, regardless of

exposure conditions.

Fires a pre-flash followed by re-

cording with flash, which reduces

the chance of red-eye.

Using the Flash

You can use the built-in flash unit to provide illumination dur-

ing recording.

Slide the Function

Switch to REC.

Press / .

• Each press of / cycles

through the flash mode in

the following sequence:

Auto

On Off Red-

eye Reduction.

Operation lamp

/ button

Camera Shake Indicator

The (camera shake indicator) appears on the monitor

screen whenever flash is turned off and shutter speed is

slow.

• If the camera shake indicator

appears, use the flash or

use a tripod to steady the camera.

• Note that the camera shake indicator

does not appear

in the Night Scene Mode (page 54).

Flash Indicator

When you press the shutter button half way, the flash icon

appears on the monitor screen to indicate that the flash will

fire when shutter button is pressed the rest of the way down.

RECORDING

IMPORTANT!

• Never use the flash in areas where combustible or ex-

plosive gas is present. Doing so creates the danger of

fire and explosion.

• Never fire the flash in the direction of a person operat-

ing a motor vehicle. Doing so can interfere with the

driver’s vision and create the danger of accident.

• Never fire the flash while it is too close to the subject’s

eyes. Intense light from the flash can cause eye dam-

age if it is fired too close to the eyes, especially with

young children. When using the flash, the camera

should be at least one meter from the eyes of the sub-

ject.

• Make sure that you do not touch or block the flash or

light sensor with your fingers. Doing so can soil these

components and interfere with correct flash operation.

• Flash should be used for distances within the range of

about 0.7 meters to 2 meters (2.3´ to 6.6´). Flash does

not work well outside this range.

• Depending on operating conditions (type of battery

being used, temperature, etc.), it may take up to 10

seconds for the flash unit to charge.

• The flash is disabled during movie, continuous, and

AEB recording. The

indicator flashes to indicate

this condition.

• The flash unit will not charge when battery power is

low. The

indicator flashes red to warn you that the

flash will not fire correctly, which may affect exposure

of the image. Replace batteries as soon as possible

when this happens.

• Red-eye reduction may not work well when the cam-

era is not pointed directly at the subject or when the

subject is far from the camera.

• In the Red-eye Reduction Mode, the flash is fired au-

tomatically in accordance with exposure. Because of

this, the flash will not fire in a well-lit area.

• White balance is fixed while the flash is being used, so

the coloring of the recorded image may be affected by

sunlight, fluorescent lighting, or other sources of illu-

mination in the immediate area.

Casio qv 5500sx Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info