Bedienungsanleitung Casio qv 5500sx (Seite 16 von 26) (Englisch)

288829

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

OTHER RECORDING FUNCTIONS

To make Record Menu settings

Slide the Function Switch to REC.

Press MENU.

Use [+] and [–] to select the category you want

to set.

Use [+] and [–] to select the item you want to

set.

Make the setting.

• If you want to change other settings, repeat steps 4

and 5.

• After you make the Record Menu settings you want,

select EXIT.

• For the Focus, Metering, and White Blance settings,

you can use the procedure under “Customizing

Record Mode Power On Settings” on page 63 specify

whether or not settings should be retained when cam-

era power is turned off. All other settings are retained

when power is turned off.

Item

Category

OTHER RECORDING FUNCTIONS

Performing Manual White Balance

Certain lighting conditions can cause Auto white balance to

take a very long time or can result in a limitation of the ad-

justable range (color temperature). If you suspect your cur-

rent lighting conditions are causing problems, try performing

manual white balance. This sets white balance to a level that

can be used under any lighting conditions.

The following procedure describes how to perform manual

white balance using a white piece of paper. For optimum re-

sults, you should use a special reflective plate that should be

commercially available from a local camera equipment

shop.

Slide the Function Switch to REC.

Press MENU.

Select “Record Options 1” “White Balance”

“Manual”.

Keeping the camera pointed at the white sheet

of paper, press DISP to make the manual white

balance settings.

• Pressing the shutter button at this time returns the

camera to the white balance setting that was obtained

the last time you performed this manual white balance

procedure.

The manual white balance procedure stops au-

tomatically when it is done.

• If the manual white balance procedure does not end

automatically, press the shutter button to interrupt it.

After the camera finishes making the white bal-

ance setting, it returns to the screen in step 3

above. Select “Exit” to exit the manual white

balance procedure.

OTHER RECORDING FUNCTIONS

Customizing Record Mode Power On Set-

tings

A power on setting is one that is set by the camera automati-

cally whenever you turn it on. Normally, the camera uses its

own built-in power on default settings. With the procedure

described here, however, you can tell the camera to save the

camera’s current Recording Mode, Flash, Focus, Metering

and White Balance settings in mode memory when it is

turned off, and to restore the setting when power is turned on

again. Settings stored in mode memory override the

camera’s preset defaults.

The following table shows the items whose settings you can

save in mode memory. Note that the procedure described

here only lets you select ON (save current setting in mode

memory) or OFF (use the camera’s preset default setting).

The procedures for changing current settings can be found

on the pages noted in the table.

Single

Auto

Multi

Auto

Recording

Mode

Flash

Focus

Metering

White Balance

Recording Mode when

power is turned off.

Current flash mode setting

(page 43).

Current focus mode setting:

Auto Focus, Manual Focus

(page 50), or Macro Mode

(page 50).

Current Manual Mode meter-

ing setting (page 59).

Current Manual Mode white

balance setting (page 59).

Item ON

OFF

(camera preset)

OTHER RECORDING FUNCTIONS

To turn power on default settings on and off

Slide the Function Switch to REC.

Press MODE, and then select .

Select “Mode”.

Select the item whose setting you want to

change.

Select “On” or “Off”.

• Repeat steps 4 and 5 for other items if you want.

• After you are finished making the settings you want,

press MENU.

Initializing Mode Memory

Use the following procedure to initialize the mode memory.

IMPORTANT!

Note that performing the following procedure to initialize

mode memory also initializes power save trigger time

settings (page 35).

Perform steps 1 through 2 under “To turn

power on default settings on and off”.

Select “Restore”.

• The following table shows the mode memory status of

each item following the above procedure.

Item Initialized Setting

Recording Mode Off

Flash On

Focus Off

Metering Off

White Balance Off

• An item that is “On” stores its current setting in mode

memory when camera power is turned off, and restores the

setting when power is turned back on again.

• An item that is “Off” uses the camera’s preset power on

default setting.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio qv 5500sx Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info