Bedienungsanleitung Casio QV-70 (Seite 17 von 18) (Englisch)

585958

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

Troubleshooting

Playback

Symptom Probable Cause Action

ALL DATA IS

PROTECTED!

Stays on moni-

tor and images

do not appear.

Delete operation

does not start

when DEL is

pressed.

All buttons and

switches do not

operate.

Very bright or

very dark LCD

image

No buttons or

switches oper-

ate.

LCD monitor is

too bright or too

dark.

Unhide protected memo-

ry pages by holding down

[–] while turning power on

(page 47).

1. Unprotect the page

you want to delete

(page 46).

2. Change to a normal-

size, 1-page display

format.

Remove batteries and

disconnect the AC adap-

tor if you are using one.

Restore power and turn

the camera on. If this

does not work, contact

your dealer or an autho-

rized CASIO service pro-

vider.

Adjust the BRIGHT set-

ting (page 11).

Remove batteries and/or

unplug the AC adaptor.

Reload batteries and/or

plug in AC adaptor and try

operation again.

Adjust the BRIGHT

(brightness) setting.

Protected memory pages

are hidden.

1. All pages are pro-

tected.

2. Multi-page display

(page 36) or zoom dis-

play (page 40)

Malfunction due to static

electrical charge or strong

impact

Wrong BRIGHT setting

Malfunction due to expos-

ing camera to electro-

static charge.

Incorrect BRIGHT setting

Deletion

Other

Reference

Symptom Probable Cause Action

Cannot ex-

change data be-

tween two cam-

eras

Cannot transfer

data (error

keeps occur-

ring)

Keys of con-

nected camera

are disabled.

1. Connect correctly

(page 57).

2. Turn power on after

connecting cable.

3. Set function switch to

PLAY (page 32).

1. Correct the situation

and try again.

2. Correct the situation

and try again.

3. Change function

switch setting of re-

ceiving camera to

PLAY (page 32).

4. The sending camera’s

protected memory

pages are hidden. Un-

hide protected memory

pages by holding down

[–] while turning power

on (page 47).

5. Replace batteries or

use the AC adaptor

(page 13).

6. Securely reconnect the

cable.

Normal operation will re-

turn when you exit data

communications by press-

ing EXIT.

1. Incorrect cable con-

nection

2. Camera connected to

is not turned on.

3. Function switch sets to

REC.

1. Sending camera’s

memory is empty.

2. Receiving camera’s

memory is full

3. Receiving camera’s

function switch is in

REC position.

4. The message “ALL

DATA IS PROTECT-

ED” is on the monitor

of the sending camera.

5. Low battery

6. Disconnection of cable

during data communi-

cation

Connected camera op-

eration is disabled during

data communications.

Other

MEMORY ERROR

#2~#3

CONSULT THE

OWNER’S MANUAL!

Messages

MEMORY FULL All 96 memory pages are used. Pages must be de-

leted (page 48) before further recording is possible.

MEMORY EMPTY No images are stored in memory.

Problem with internal memory. Perform the following

procedure.

1. Press [+].

2. After checking that the ERROR RESET message

is on the display, press the shutter button to per-

form a system reset or turn power off if you do not

want to perform a system reset. The display should

return to normal after the system reset is complete.

• Never turn off power while the system reset is in

progress! Doing so will damage camera memory

are require servicing by an authorized service

provider!

• Be sure to power the camera using the AC adap-

tor or a new set of alkaline or lithium batteries.

Weak batteries or manganese batteries can re-

sult in a power failure while the system reset op-

eration is in progress, causing damage to cam-

era memory.

Important!

• System reset can result in a change in the order of

images stored in camera memory.

• Corrupted images may be lost entirely.

• If image data is partially corrupted, parts of the im-

age may not be recoverable.

Problem with internal memory. Contact your dealer or

an authorized CASIO service provider.

ERROR RESET

YES SHUTTER

NO CALL TECH

SUPPORT

MEMORY ERROR

YES

NO CALL TECH

SUPPORT!

Reference

Specifications

General

Recording System... Digital (JPEG based)

Signal System ......... NTSC

Recording Medium .. Built-in 2MB flash memory

Number of Pages .... 96

Delete Functions ..... Single page; All pages (with page protect feature)

Imaging Device ....... 1/5-inch CCD (Total Number of Pixels: 250,000)

Lens ........................ Fixed focus with macro position; F2.8/f = 5.2mm

Aperture .................. F2.8/F8 manual switching

Focal Length ........... F2.8/NORMAL : 0.6m to 3.0m/2.0 to 9.8 feet

F2.8/MACRO : 12cm to 14cm/4.7" to 5.5"

F8/NORMAL : 0.4m to ∞/1.3feet to ∞

F8/MACRO : 10cm to 18cm/3.9" to 7.1"

(from lens protection filter)

Light Metering ......... TTL center point by photographic element

Exposure Metering .. Aperture priority AE

Exposure Range ..... EV +6 to 18

Exposure Adjustment ...

-2EV to +2EV

Shutter System ....... Electronic

Shutter Speed ......... 1/8 to 1/4000 second

White Balance ......... Automatic

Self-timer................. 10-second

Monitor .................... 61,380-pixel 1.8-inch TFT low-glare color LCD;

doubles as finder

Terminals ................ DIGITAL; VIDEO OUT; DC IN 6V

Power Supply .......... Batteries (AA-size Alkaline or Lithium batteries X 3)/

AC Adaptor (AD-C67)

Power Consumption ..

3.2 W

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio QV-70 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info