Bedienungsanleitung Casio qv 700 (Seite 9 von 25) (Englisch)

288830

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

Recording Images

How to avoid hand movement…

Any hand movement when you press the shutter button can causes

blurring of the recorded image. Note the following points on avoiding

hand movement.

• Make sure there is no excessive movement of the image of the ob-

ject on the LCD.

Fluorescent Lighting

Fluorescent lighting actually flickers at a frequency that cannot be

detected by the human eye. When using the camera indoors under

such lighting, you may experience some brightness or color problems

with recorded images.

Caution

Never open the battery compartment cover, disconnect the AC

adaptor from the camera or unplug it from the wall socket while the

“WAIT” message is on the LCD. Doing so will not only make storage

of the current image impossible, it can also corrupt other image data

already stored in camera memory.

Operation

Shooting Images Outdoors

Note that strong direct or reflected light can cause vertical lines in an

image. This is due to the characteristics of the camera’s charge-cou-

pled device (CCD), and it does not indicate malfunction of the cam-

era.

Shooting with the Flash

With the AUTO Flash Mode, the camera automatically fires the flash

whenever it detects that lighting is too low. Note that the monitor

screen image disappears and the charger lamp flashes to indicate

that the flash unit is recharging. See “Using the Flash” on page 41 for

full details on using the flash.

Important!

Do not fire the flash when it is located a very short distance from a

person, especially when it is pointed at the person’s face. Doing so

creates the danger of eye damage.

Changing the Lens Orientation

The lens of the camera is built into a lens body that is designed to

rotate. This means you can change the angle of the lens without mov-

ing the rest of the camera.

Rotates up to 90

towards the front

Rotates up to 180

towards the back

Recording Images

• Any images recorded while the lens body is rotated so the lens is

pointed from the back of the camera are stored as mirror images of

the image that appears in the LCD before the shutter button is

pressed.

Important!

• Do not apply excessive force when rotating the lens body. Doing so

can cause serious damage to the lens.

• Do not carry the camera or move it around while holding onto only

the lens body.

• Return the lens body to its normal position (with the lens pointing

from the front of the camera) before storing the camera.

A LCD when shutter button is

pressed (in the Record Mode)

B LCD when image is played

back from camera memory

.......

Operation

NORMAL/MACRO Switch

The NORMAL/MACRO switch tells the camera

how much distance there will be between the

lens and the object whose image you are record-

ing. The following table describes the conditions

covered by each switch setting.

is shown on the monitor screen whenever the

macro position is in use.

Focus Range

(MACRO)

14 to 16 cm

(5.5" ~ 6.3")

(NORMAL)

0.7 meters to ∞

(2.3' ~ ∞)

The above figures indicate the distance from the lens protection filter

to the subject.

Resolution Modes

The camera has three resolution modes: FINE ( ), NORMAL ( ),

and ECONOMY (

). The following shows the number of images that

can be recorded on a 2MB memory card in each mode.

• To determine the number of images that can be stored on a memory

card of a different capacity, multiply the capacities in the table by the

appropriate value. In the case of a 4MB memory card, for example,

multiply by 2.

• The actual number of images that can be recorded may differ some-

what from the values provided below, due to the amount of memory

required for storage of different types of images.

Resolution

Mode

Indicator Number of Images

FINE

NORMAL

ECONOMY

Approximately 14

(approximately 133KB compressed)

Approximately 26

(approximately 70KB compressed)

Approximately 47

(approximately 38KB compressed)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio qv 700 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info