Bedienungsanleitung Casio qv 700 (Seite 12 von 25) (Englisch)

288830

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

Recording Images

4. Use [+] and [–] to select the type of self-timer recording you

want to perform, and then press the shutter button.

5. Point the camera at the subject and press the shutter but-

ton.

Note

During self-timer recording, you may find it helpful to rotate the swivel

lens mechanism 180 degrees so the monitor screen faces the same

direction as the lens. This way you can always see how much time is

left until the start time is reached and recording begins.

Using the Timer

You can use the timer to perform any one of the following operations.

• Interval Recording

Use this method to record a series of images at fixed time inter-

vals.

• Timer Recording

Use this method to record a single image after passage of a fixed

amount of time.

• Interval Timer Recording

Use this method to record a series of images at fixed time inter-

vals, starting after passage of a fixed amount of time.

Operation

To record using timer recording

1. Mount the camera onto a tripod.

2. Slide the function switch to the REC position.

3. Align the dial with to select timer recording.

• Pressing the shutter button here, performs timer recording

using the last method you previously selected.

4. Press MENU.

5. Use [+] and [–] to select the number of shots you want to

record, and then press the shutter button.

• If you select 1, jump skip step 6 and jump directly to step 7.

6. Use [+] and [–] to select the interval between shots, and

then press the shutter button.

• You can specify an interval of from 1 to 60 minutes, in 1-

minute steps.

7. Use [+] and [–] to select the start time of the record opera-

tion, and then press the shutter button.

• You can specify any amount of time up to 24 hours from the

present.

Recording Images

Turning on Power During Timer Operation

The display shown below appears on the monitor screen whenever

you turn on camera power while a timer operation is in progress, and

the timer operation is automatically cancelled.

8. Point the camera at the subject and press the shutter but-

ton.

• When the start time you set is reached, the charge lamp

lights and image recording starts.

• Following exposure correction (page 37), the corrected ex-

posure value is applied to the first image recorded only. The

exposure automatically returns to its initial default setting of

zero for subsequent images.

Operation

Using Panorama Recording

You can link multiple images together on your personal computer to

create an exciting panoramic effect. Use the following procedure to

record images to be used to create a panorama.

To record a panorama

1. Slide the function switch to the REC position.

2. Align the dial with to select panorama recording.

• Pressing the shutter button here, performs panorama re-

cording using the last method you previously selected.

3. Press MENU.

4. Use [+] and [–] to select either HORIZONTAL or VERTICAL.

• If you select VERTICAL, you

should position the camera as

shown in the illustration when

shooting the image.

Point the camera at the subject and press the shutter button.

• The previous image you recorded remains on the monitor

screen, so you can use it to correctly compose the next im-

age.

REC

PLAY

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio qv 700 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info