Bedienungsanleitung Casio qv 7000sx (Seite 4 von 32) (Englisch)

288831

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

PRECAUTIONS

Monitor Screen

Recording

The image shown on the monitor screen during recording is

intended for composition purposes only, so its resolution

does not match that of the image as it is recorded. The im-

age is recorded in accordance with the resolution setting

made with the procedure under “Resolution Settings” on

page 44. Monitor screen refresh speed varies according to

the relative brightness of the subject.

Playback

• This camera is designed for high-speed scrolling of images

during playback. Because of this, the playback image that

initially appears on the monitor screen does not show the

full resolution of the image as recorded. When you stop at

the image you want, the monitor screen refreshes and

shows the image in its full resolution.

• The message “PREVIEW” appears on a TV or CRT screen

when a preview image is on the screen during output to the

VIDEO OUT terminal.

• The display area of the image shown on the monitor screen

is slightly smaller than the actual full image.

Lens

• Camera performance can be adversely affected by finger-

prints or dirt on the lens surface. Never touch the lens sur-

face with your fingers.

• Should the lens become dirty, use a blower to blow off dirt

and dust, or a soft, dry cloth to wipe off the lens.

• This camera uses a telescoping type lens, which moves

whenever the camera is turned on or off. Make sure noth-

ing is blocking lens movement and never turn power on or

off while the camera is laying lens down.

• Never remove batteries or disconnect the AC adaptor while

the lens is extended. Doing so can cause the lens to be-

come stuck in the extended position, resulting in camera

malfunction.

PRECAUTIONS

QV-7000SX

Declaration of Conformity

Model Number: QV-7000SX

Trade Name: CASIO COMPUTER CO.,LTD.

Responsible party: CASIO INC.

Address: 570 MT. PLEASANT AVENUE,

DOVER,NEW JERSEY 07801

Telephone number: 973-361-5400

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, in-

cluding interference that may cause undesired operation.

CASIO COMPUTER CO.,LTD.

Tested To Comply

With FCC Standards

FOR HOME OR OFFICE USE

GUIDELINES LAID DOWN BY FCC RULES FOR USE OF

THIS UNIT IN THE U.S.A. (not applicable to other areas).

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) this device may not cause harmful in-

terference, and (2) this device must accept any interference received, in-

cluding interference that may cause undesired operation.

NOTICE

This equipment has been tested and found to comply with the limits for

a Class B peripheral, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interfer-

ence to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC WARNING

Changes or modifications not expressly approved by the party respon-

sible for compliance could void the user's authority to operate the

equipment.

Properly shielded cables with ferrite core must be used for connection

to host computer and/or peripherals in order to meet FCC emission

limits.

THE SPECIAL VIDEO CABLE THAT COMES WITH THE CAMERA

----- THE CAMERA TO A VIDEO IN TERMINAL OF A COMPUTER

THE SPECIAL CONNECTION CABLE THAT COMES WITH QV-Link SOFTWARE

----- THE CAMERA TO A PROPER TERMINAL OF A COMPUTER

Connecting the Strap

Attaching the Strap

The two-way strap that comes with the camera can be used

either as a shoulder strap or a wrist strap. Pass the wrist

strap through the hole on the side of the camera as shown in

the illustration.

UNPACKING

Check to make sure that all of the items shown below are

included with your camera. If something is missing, contact

your dealer as soon as possible.

2-Way Shoulder/

Wrist Strap

Camera

Soft case

Video cable

Manual

UNPACKING

Using the Strap as a Wrist Strap

Detach the upper strap from the main strap (Figure 1), and

then attach the two buckles of the main strap to each other

(Figure 2).

Press the buckles together until they snap securely into

place.

upper strap

main strap

(Figure 1) (Figure 2)

Using the Strap as a Shoulder Strap

Attach the strap to the camera so the shoulder pad is on the

inside of the loop.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio qv 7000sx Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info