Bedienungsanleitung Casio qv 7000sx (Seite 8 von 32) (Englisch)

288831

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

POWER SUPPLY

Low Battery Indicator

The battery capacity indicator in the lower left of the monitor

screen (shown only when image information display is

turned on) changes to “

” whenever battery power goes

low. If you continue to use the camera, a battery warning

indicator “

” will appear in the center of the monitor

screen, and then camera power will automatically turn off. If

this happens, replace all four batteries with new ones as

soon as possible.

• Dead batteries are susceptible to leakage, which can

cause serious damage to your camera. Remove batteries

from the camera as soon as you notice they are dead.

• The batteries that power this camera normally become

warm when they lose power. This does not indicate mal-

function.

Battery Handling Precautions

Incorrect use or handling of batteries can cause them to leak

or burst and seriously damage your camera. Be sure to note

the following important precautions to avoid problems with

batteries.

• Remove batteries from the camera if you do not plan to use

it for more than two weeks.

• Never recharge batteries, never allow direct connection

between two ends of a battery, and never try to take batter-

ies apart.

• Do not expose batteries to direct heat or dispose of them

by burning. Doing so can create the danger of explosion.

• Never mix batteries of different types.

• Use only LR6 (AM-3) type alkaline or FR6 type

lithium or Ni-MH (nickel-metal hydride) dry cell

batteries with this camera. Never mix old bat-

teries with new ones. Doing so can result in

bursting or leaking of batteries, creating the

danger of fire or personal injury.

• Always make sure that the positive (+) and

negative (–) ends of the batteries are facing

correctly, as noted by the markings on the

camera itself. Improper loading of batteries can

result in bursting or leaking of batteries, creat-

ing the danger of personal injury or soiling of

objects nearby.

CAUTION

POWER SUPPLY

AC power

terminal

Using AC Power

Use the optional AC adaptor (AD-C620) to power the cam-

era from standard AC power.

AC Adaptor precautions

• Never use an electrical outlet whose voltage is

outside the rating marked on the AC adaptor.

Doing so can create the danger of fire or elec-

trical shock. Use only the optional AC adaptor

specified for this camera.

• Should the cord of the AC adaptor become

damaged (exposed internal wiring), request a

replacement from an authorized CASIO ser-

vice provider. A damaged AC adaptor cord cre-

ates the danger of fire or electrical shock.

AC outlet

AC adaptor

CAUTION

Auto Power Off

(Battery Powered Operation Only)

Power automatically turns off whenever you do not perform

any camera operation for a specific period. See page 32 for

details about how you can specify the Auto Power Off time.

• To restore power, simply slide the POWER Switch again.

IMPORTANT!

The Auto Power Off function does not operate under the

following conditions.

• During Auto Play (page 76)

• While the camera is being operated from a computer

or printer over a cable connection or infrared connec-

tion (page 100, 101).

• Whenever the AC adaptor is connected to the camera.

• Always be sure to use the AD-C620 AC adap-

tor only. Using any other AC adaptor can cause

damage to the camera not covered by the war-

ranty.

• When unplugging the AC adaptor from the wall

socket, be sure to grasp the adaptor (not the

cord).

• Avoid any undue bending, pulling, and twisting

of the AC adaptor’s cord, and never try to

lengthen the cord by splicing it with other wire.

• Be sure to turn power off before connecting or disconnect-

ing the adaptor.

• Always turn camera power off before disconnecting the AC

adaptor, even if the camera has batteries installed. If you

don’t, the camera will turn off automatically when you dis-

connect the AC adaptor. Even so, you run the risk of dam-

aging the camera whenever you disconnect the AC adap-

tor without first turning power off.

• The AC adaptor may become warm to the touch after ex-

tended periods of use. This is normal and is not cause for

alarm.

• After use turn off the POWER Switch of the camera and

unplug adaptor from the AC outlet.

• The camera automatically switches over to AC adaptor

powered operations whenever the AC adaptor is plugged

into the camera.

• Always use the AC adaptor to power the camera whenever

it is connected to a computer.

CAUTION

POWER SUPPLY

Power Save Settings

The settings described below let you specify sleep and auto

power off trigger times that help to conserve valuable battery

power.

SLEEP .................. The monitor screen enters a sleep state

if no operation is performed for a speci-

fied amount of time in the Record Mode.

Full power is restored when you press

the shutter button. You can specify 30

seconds, 1 minute, or 2 minutes before

the sleep state is triggered, or you can

turn off this setting entirely.

AUTO

POWER OFF ........ Auto Power Off turns off camera power if

no operation is performed for a specified

amount of time. You can specify 2 min-

utes, 5 minutes, or 10 minutes before

AUTO POWER OFF is triggered, or you

can turn off this setting entirely.

• AUTO POWER OFF takes priority

when both SLEEP and AUTO POWER

OFF are both set for a 2-minute trigger

time. This means camera power turns

off if no operation is performed after

two minutes.

To set SLEEP and AUTO POWER OFF trigger times

Slide the Function Switch to REC.

Align the dial with .

Use [+] and [–] to select

POWER SAVE, and then

press the shutter button.

Use [+] and [–] to select SLEEP or AUTO

POWER OFF.

POWER SUPPLY

Casio qv 7000sx Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info