Bedienungsanleitung Casio qv 7000sx (Seite 11 von 32) (Englisch)

288831

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

RECORDING

• The monitor screen goes blank and the operation indicator

flashes amber while the flash unit is charging.

Camera Shake Indicator

The (camera shake indicator) appears on the monitor

screen whenever flash is turned off and shutter speed is

slow.

• If the camera shake indicator

appears, use the flash or

use a tripod to steady the camera.

• Note that the camera shake indicator

does not appear

in the Night Mode (page 54).

Flash Indicator

When you press the shutter button half way, the flash icon

appears on the monitor screen to indicate that the flash will

fire when shutter button is pressed the rest of the way down.

Operation indicator

Indicator

None

Flash Mode

Auto Flash

Flash On

Flash Off

Red-eye

Reduction

Description

Flash is automatically enabled and

disabled in accordance with expo-

sure conditions.

Flash is always fired, regardless of

exposure conditions.

Flash is never fired, regardless of

exposure conditions.

Fires a pre-flash followed by re-

cording with flash, which reduces

the chance of red-eye.

Using the Flash

You can use the built-in flash unit to provide illumination dur-

ing recording.

Slide the Function

Switch to REC.

Press .

• Each press of cycles

through the flash mode in

the following sequence:

Auto

On Off Red-

eye Reduction.

button

RECORDING

IMPORTANT!

• Never use the flash in areas where combustible or ex-

plosive gas is present. Doing so creates the danger of

fire and explosion.

• Never fire the flash in the direction of a person operat-

ing a motor vehicle. Doing so can interfere with the

driver’s vision and create the danger of accident.

• Never fire the flash while it is too close to the subject’s

eyes. Intense light from the flash can cause eye dam-

age if it is fired too close to the eyes, especially with

young children. When using the flash, the camera

should be at least one meter (40") from the eyes of the

subject.

• Make sure that you do not touch or block the flash or

light sensor with your fingers. Doing so can soil these

components and interfere with correct flash operation.

• Flash should be used for distances within the range of

about 0.7 meters to 2 meters (2.3 to 6.6'). Flash does

not work well outside this range.

• Depending on operating conditions (type of battery

being used, temperature, etc.), it may take up to 10

seconds for the flash unit to charge.

• The flash is disabled during movie recording. The

indicator flashes to indicate this condition.

• The flash unit will not charge when battery power is

low. The

indicator flashes red to warn you that the

flash will not fire correctly, which may affect exposure

of the image. Replace batteries as soon as possible

when this happens.

• Red-eye reduction may not work well when the cam-

era is not pointed directly at the subject or when the

subject is far from the camera.

• In the Red-eye Reduction Mode, the flash is fired au-

tomatically in accordance with exposure. Because of

this, the flash will not fire in a well-lit area.

• White balance is fixed while the flash is being used, so

the coloring of the recorded image may be affected by

sunlight, fluorescent lighting, or other sources of illu-

mination in the immediate area.

RECORDING

IMPORTANT!

• Do not apply excessive force when rotating the lens

body. Doing so can cause serious damage to the lens.

• Do not carry the camera or move it around while hold-

ing onto only the lens body.

• Return the lens body to its normal position (with the

lens pointing from the front of the camera) before stor-

ing the camera.

A ....... LCD when shutter but-

ton is pressed (in the Re-

cord Mode)

B ....... LCD when image is play-

ed back from camera

memory

• Any images recorded while the lens body is rotated so the

lens is pointed from the back of the camera are stored as

mirror images of the image that appears in the LCD before

the shutter button is pressed.

Changing the Lens Orientation

The lens of the camera is built into a lens body that is de-

signed to rotate. This means you can change the angle of

the lens without moving the rest of the camera.

Rotates up to 90

towards the front

Rotates up to 180

towards the back

RECORDING

Resolution Settings

The camera has four resolution modes: SUPER FINE ( ),

FINE (

), NORMAL ( ), ECONOMY ( ).

• To determine the number of images that can be stored on a

memory card of a different capacity, multiply the capacities

in the table by the appropriate value.

• The actual number of images that can be stored in memory

cannot be specified precisely because the amount of

memory required for storage of each image differs accord-

ing to image contents.

• Numbers in parentheses are compressed image file sizes.

• The figures in the left are approximations only. The actual

number of images depends on image subject matter.

Use the procedure under “Using the Record Menu” on

page 59 for details on changing the resolution modes.

• Note that the maximum number of images that can be

stored in a single folder is 250. Because of this, even if you

are using a card that allows storage of more than 250 im-

ages, the camera’s monitor screen will show capacity for

up to 250 images only. You will be able to store the addi-

tional images by changing to another folder.

• The number of images that can be recorded may be less

when HTML file generation is turned on (page 114).

Setting Indicator

Resolution

Number of Images

8MB memory card

Number of Images

48MB memory card

(option)

File Size

(per image)

Computer

Output image

SUPER FINE NORMAL

ECONOMY

FINE

14 19 33 55

88 123 206 340

500KB 350KB 200KB 112KB

1280 x 960 1280 x 960 1280 x 960 640 x 480

pixels pixels pixels pixels

Casio qv 7000sx Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info